This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 2583
Network Working Group                                         P. Hoffman
Request for Comments: 5518                                     J. Levine
Category: Standards Track                       Domain Assurance Council
                                                             A. Hathcock
                                                      Alt-N Technologies
                                                              April 2009


                           Vouch By Reference

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (c) 2009 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents in effect on the date of
   publication of this document (http://trustee.ietf.org/license-info).
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

Abstract

   This document describes the Vouch By Reference (VBR) protocol.  VBR
   is a protocol for adding third-party certification to email.  It
   permits independent third parties to certify the owner of a domain
   name that is associated with received mail.

Table of Contents

   1. Introduction ....................................................3
      1.1. Definitions ................................................4
   2. Use of the VBR-Info Header Field ................................4
   3. Validation Process ..............................................4
   4. The VBR-Info Header Field .......................................5
      4.1. Syntax of VBR-Info Header Fields ...........................5
   5. DNS Query .......................................................6
   6. Types of Message Content ........................................7
      6.1. All ........................................................8
      6.2. List .......................................................8
      6.3. Transaction ................................................8
   7. Obtaining a Useful Domain Name ..................................8
      7.1. DKIM .......................................................8
      7.2. DomainKeys .................................................9
      7.3. SPF ........................................................9
      7.4. Sender ID .................................................10
   8. Security Considerations ........................................10
   9. IANA Considerations ............................................10
   10. References ....................................................11
      10.1. Normative References .....................................11
      10.2. Informative References ...................................11
   Appendix A.  Acknowledgements .....................................12

1.  Introduction

   Vouch By Reference, or VBR, is a protocol for adding third-party
   certification to email.  Specifically, VBR permits independent third
   parties to certify the owner of a domain name that is associated with
   received mail.  VBR may be performed anywhere along the email transit
   path, by any capable receiving module, either within the handling
   service or by end-user software.

   VBR accomplishes this with a two-part protocol:

   o  In the first part, a sender affixes VBR information to email
      messages.  The VBR information says which domain certification
      services the sender believes will vouch for email traffic
      associated with that sender.

   o  In the second part, the receiver queries one or more certification
      services to obtain information about the identity that has been
      associated with a received message.  This latter protocol uses the
      DNS to distribute the certification information.

   A sender provides certification attestations through the use of a new
   RFC 5322 ([RFC5322]) mail header field, "VBR-Info:".  This header
   field contains the names of services that the sender claims will
   vouch for it, and the particular type of content of the message.  A
   queried, third-party, DNS-based certification service can respond
   with a list of the types of message content it will vouch for, such
   as "transactional mail from somebank.example" and/or "all mail from
   anotherbank.example".

   A prerequisite for successful VBR operation is validation of the
   identity associated with the message.  VBR is based on the use of
   domain names as identifiers, and permits multiple methods of
   obtaining and validating domain names.  The validation methods are
   described in the "Obtaining a Useful Domain Name" section below.

   The sender performs two steps:

   1.  Adds a VBR-Info header field to its message

   2.  Protects the message, as appropriate

   If a recipient uses the results of vouching to adjust spam scores on
   incoming email, that recipient is placing a great deal of operational
   trust and power in the vouching service.  Therefore, recipients need
   to select such services with care.  Further, such recipients may want
   to select more than one vouching service in order to avoid a single
   point of failure for setting spam scores.

1.1.  Definitions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

2.  Use of the VBR-Info Header Field

   A sender uses VBR to indicate which domain certification services the
   sender believes will vouch for a particular piece of mail.  The
   certification service uses VBR to state for which signatures it will
   vouch.  This protocol uses the DNS to distribute the certification
   information.

   A message may have multiple VBR-Info header fields.  This means that,
   in the terminology of RFC 5322, VBR-Info is a "trace header field"
   and SHOULD be added at the top of the header fields.

   The content of the VBR-Info header field is a list of three elements:

   o  The accountable domain

   o  The type of content in the message

   o  A list of domain names of services that the sender expects to
      vouch for that kind of content

   The accountable domain is given as md= followed by a domain name.
   The content type is given as mc= followed by a string; the defined
   values of that string are found below.  The list of services is given
   as mv= followed by a colon-separated list of domain names.

   The formal syntax of the header field is defined in Section 4.

3.  Validation Process

   A message receiver uses VBR to determine certification status by
   following these steps:

   1.  Extracts the domain to certify and the type of message content

   2.  Verifies legitimate use of that domain using one or more
       authentication mechanisms as described herein

   3.  Obtains the name of a vouching service that it trusts, either
       from among the set supplied by the sender or from a locally
       defined set of preferred vouching services

   4.  Queries the vouching service to determine whether the vouching
       service actually vouches for that type of content for that
       domain.

4.  The VBR-Info Header Field

   The VBR-Info header field has the following format:

      VBR-Info: md=<domain>; mc=<type-string>; mv=<certifier-list>;

   where <domain> is the domain for which vouching is offered, <type-
   string> is the content type of the message, and <certifier-list> is a
   list of domain names of certification providers that the sender
   asserts will vouch for this particular message.  The structure of the
   <certifier-list> is one or more domain names with a colon (":")
   between each.  The elements in the <domain>, <type-string>, and
   <certifier-list> must not have any white space in them.

   For example, assume that the signer has two companies that are
   willing to vouch for its transactional notices: certifier-a.example
   and certifier-b.example.  The signer would add the following to the
   header of its outgoing message.

      VBR-Info: md=somebank.example; mc=transaction;
          mv=certifier-a.example:certifier-b.example;

   All three header parameters in the VBR-Info header are mandatory.  In
   particular, there is no default for the md= domain.

   Upper and lowercase characters in a VBR-Info header field are
   equivalent, although conventionally the contents are all in lower
   case.  For upward compatibility, verifiers MUST accept the fields in
   any order and SHOULD ignore any fields other than the three defined
   here.

   If a message has more than one VBR-Info header field, verifiers
   SHOULD check each in turn or in parallel until either a satisfactory
   certifier is found or all the header fields have been checked.  All
   of the VBR-Info header fields in a single message MUST have identical
   mc= values.

4.1.  Syntax of VBR-Info Header Fields

   In the ABNF below, the ALPHA and DIGIT tokens are imported from
   [RFC5234], and the FWS and domain-name tokens are imported from
   [RFC4871].

   vbr-info-header =  "VBR-Info:" 1*([FWS] element [FWS] ";")
   element = md-element / mc-element / mv-element

   md-element = "md=" [FWS] domain-name

   mc-element = "mc=" [FWS] type-string
   type-string = "all" / "list" / "transaction"

   mv-element = "mv=" [FWS] certifier-list
   certifier-list = domain-name *(":" domain-name)

5.  DNS Query

   When a recipient wants to check whether a certification claim is
   valid, it compares the list in the message to the list of services it
   trusts.  For each service that is on the intersection of the two
   lists, it marshals a domain name to look up that consists of the
   following DNS labels (from left to right):

   o  the domain name that asserts it can be certified

   o  _vouch (a string literal)

   o  the host name of the vouching service

   This domain name is queried for a DNS TXT record.  The recipient
   looks up the domain name in the DNS in the exact same manner it looks
   up all other domain names.

   For example, if a message signed by somebank.example contained the
   VBR-Info header field above, the receiver might look up either or
   both of the following names, depending on which vouching service it
   trusts:

      somebank.example._vouch.certifier-b.example
      somebank.example._vouch.certifier-a.example

   If the DNS TXT record exists, it contains a space-delimited list of
   all the types that the service certifies, given as lowercase ASCII.
   For example, the contents of the TXT record might be:

      transaction list

   In the example above, the receiver checks whether or not either
   certifier vouches for "transaction" mail.  That would be indicated by
   either of the following types: "all" or "transaction" ("all"
   indicates that the certifier vouches for all message types sent by
   the domain in question).  If either of those types appear in either

   TXT record, the certifier has vouched for the validity of the
   message.  Of course, the recipient needs to ignore services that it
   does not trust; otherwise, a bad actor could just add an authority
   that it has set up so that it can vouch for itself.

   The name for the label _vouch was chosen because any domain name that
   includes it as one of its labels cannot be a valid host name.  There
   will never be any accidental overlap with a valid host name.
   Further, it is safe to create a rule that says that a TXT DNS record
   that comes from a domain name that includes a _vouch label will
   always have the structure defined in this document.

   If the RDATA in the TXT record contains multiple character-strings
   (as defined in Section 3.3 of [RFC1035]), the code handling that
   reply from DNS MUST assemble all of these marshaled text blocks into
   a single one before any syntactical verification takes place.

   Verifiers MUST then check that the TXT record consists of strings of
   lowercase letters separated by spaces, and discard any records not in
   that format.  This defends against misconfigured records and
   irrelevant records synthesized from DNS wildcards.

   The VBR record MUST have only one TXT record.

   This query method relies on the considerable advantages of existing
   DNS efficiencies, reliability, and experience.  The lookup is very
   efficient, and certifiers can add and delete client records as
   quickly as they want.  The lookup also leverages the DNS's negative
   caching ([RFC2308]).

6.  Types of Message Content

   This section describes the types of content for which a certifier can
   vouch.  While the rest of the VBR specification is mostly technical
   and precise, describing the types of contents in mail messages is
   inherently open to interpretation.  Thus, this section makes
   distinctions as specifically as possible, but the reader needs to
   understand that these semantic definitions can be interpreted in very
   different ways by different people.

   Note that the value in the mc= element is self-asserted.  The purpose
   of this element is for auditing.  There will likely be cases where a
   certifier will vouch for one type of a sender's mail (such as
   transactional mail) but not another type (such as advertising).  A
   sender who cannot get anyone to certify its advertising mail, but has
   a certifier for its transactional mail, might be tempted to cheat and

   mislabel it as transactional.  The mc= element creates an the audit
   trail to help their certifiers catch such cheating and allow the
   removal of the certification for the transactional mail.

   Three types of content are defined.

6.1.  All

   "all" means all mail from the sender.

6.2.  List

   "list" is the category for email sent to multiple recipients where
   each piece of mail is identical or is very similar to the others.

6.3.  Transaction

   "transaction" is the category for transactional messages.  This is a
   response to a specific action of the user, or a notice about an event
   in the user's account at the sender.

7.  Obtaining a Useful Domain Name

   VBR relies on having a domain name that specifies a party that is
   accountable for the message.  This requires obtaining the domain name
   and possessing a strong basis for believing that the use of the
   domain name is valid, that is, that it has not been spoofed.

   There are different ways to achieve this and this section discusses
   the allowed mechanisms.  Senders SHOULD use Domain Keys Identified
   Mail (DKIM) (and MAY use DomainKeys, Sender Policy Framework (SPF),
   or SenderID) to give an accountable identity for the sender.

7.1.  DKIM

   DomainKeys Identified Mail (DKIM), [RFC4871], defines an accountable
   identity by associating a domain name with the message.  It provides
   assurance that the association is valid through a public-key-based
   authentication mechanism.

   o  When DKIM is the validation mechanism, VBR's md= MUST match the
      domain name taken from one of the DKIM-Signature header fields.
      The domain name from the DKIM signature d= field is used. 
EID 2583 (Verified) is as follows:

Section: 7.1

Original Text:

If the DKIM signature contains an i= field, the domain name from
that field is used; otherwise, the domain name from the DKIM
signature d= field is used.

Corrected Text:

The domain name from the DKIM signature d= field is used.
Notes:
RFC 5672 clarifies that the d= domain is the primary identity in a DKIM signature.
o The VBR-Info header field SHOULD be included in the set of header fields protected by DKIM to prevent a malicious party from changing the contents of the VBR-Info header field or adding bogus VBR-Info header fields. o The VBR-Info header field SHOULD be added in the header immediately below the corresponding DKIM-Signature header field. If the DKIM signature validates, the domain name taken from that signature is valid for use with VBR. 7.2. DomainKeys DomainKeys (DK), [RFC4870], defines an accountable identity by associating a domain name with the message in the d= tag of the DomainKey-Signature header field. It provides assurance that the association is valid through a public-key-based authentication mechanism. o When DomainKeys is the validation mechanism, VBR's md= MUST be the same value as the domain name found in the DomainKey-Signature d= parameter. o The VBR-Info header field SHOULD be included in the set of header fields protected by DK to prevent a malicious party from changing the contents of the VBR-Info header field or adding bogus VBR-Info header fields. o The VBR-Info header field SHOULD be added immediately below the corresponding DomainKey-Signature header field. If the DomainKeys signature validates, the domain in the d= tag is valid for use with VBR. 7.3. SPF Sender Policy Framework (SPF), [RFC4408], defines an accountable identity by using an existing message address and querying the DNS to discover whether it is valid for SPF use. When SPF is the validation mechanism, VBR's md= MUST be the same value as the domain name in the <reverse-path> address that is the first parameter to the SMTP MAIL command. A domain is valid for use with VBR only when the SPF process produces a "pass" result. 7.4. Sender ID Sender ID, [RFC4406], defines an accountable identity by using an existing message address known as the Purported Responsible Address ([RFC4407]) and querying the DNS to discover whether it is valid for Sender ID use. When Sender ID is the validation mechanism, VBR's md= MUST be the same value as the domain name in the Purported Responsible Address in the message. A domain is valid for use with VBR only when the Sender ID process produces a "pass" result. 8. Security Considerations VBR is used to allow users to trust independent third parties to certify the owner of a domain name that is associated with received mail. The party validating the mail might use that trust relationship to perform actions that affect the security of their system. The receiver of a message with a VBR-Info header field MUST ignore certifiers that it does not trust; otherwise, a bad actor could just add an authority that it has set up so that it can vouch for itself. Implementations SHOULD limit the number of VBR-Info header fields they process in a single message in order to protect themselves from a make-work or denial-of-service attack. 9. IANA Considerations IANA registered the VBR-Info header field in the Message Header Fields Registry ([RFC3864]) as follows: Header field name: VBR-Info Applicable protocol: mail Status: standard Author/Change controller: IETF Specification document(s): RFC 5518 Related information: none 10. References 10.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008. [RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322, October 2008. 10.2. Informative References [RFC1035] Mockapetris, P., "Domain names - implementation and specification", STD 13, RFC 1035, November 1987. [RFC2308] Andrews, M., "Negative Caching of DNS Queries (DNS NCACHE)", RFC 2308, March 1998. [RFC3864] Klyne, G., Nottingham, M., and J. Mogul, "Registration Procedures for Message Header Fields", BCP 90, RFC 3864, September 2004. [RFC4406] Lyon, J. and M. Wong, "Sender ID: Authenticating E-Mail", RFC 4406, April 2006. [RFC4407] Lyon, J., "Purported Responsible Address in E-Mail Messages", RFC 4407, April 2006. [RFC4408] Wong, M. and W. Schlitt, "Sender Policy Framework (SPF) for Authorizing Use of Domains in E-Mail, Version 1", RFC 4408, April 2006. [RFC4870] Delany, M., "Domain-Based Email Authentication Using Public Keys Advertised in the DNS (DomainKeys)", RFC 4870, May 2007. [RFC4871] Allman, E., Callas, J., Delany, M., Libbey, M., Fenton, J., and M. Thomas, "DomainKeys Identified Mail (DKIM) Signatures", RFC 4871, May 2007. Appendix A. Acknowledgements Many members of the Domain Assurance Council contributed to the design of the protocol and the wording of this document. In addition, constructive suggestions were received from Jim Fenton and Murray Kucherawy. Authors' Addresses Paul Hoffman Domain Assurance Council EMail: paul.hoffman@domain-assurance.org John Levine Domain Assurance Council EMail: john.levine@domain-assurance.org Arvel Hathcock Alt-N Technologies EMail: arvel.hathcock@altn.com