Many Geographical Analysis utilizes spatial autocorrelation, that allows us to study the geographical evolution from different points of view. One measurement for spatial autocorrelation is Moran’s I, that is based on Pearson’s correlation coefficient in general statistics <arXiv:1606.03658> ## Performing the Analysis This package offers a straight fordward to perform the whole analisys by using the function rescaleI which requires an input file with a specific format you can see it at Loading data section

{r whole_analysis} library(Irescale) fileInput<-system.file("testdata", "chen.csv", package="Irescale") data<-loadFile(fileInput) scaledI<-rescaleI(data,samples=1000, scalingUpTo="MaxMin") fn = file.path(tempdir(),"output.csv",fsep = .Platform$file.sep) saveFile(fn,scaledI) if (file.exists(fn)) #Delete file if it exists file.remove(fn)

Analysis Step by Step

The analysis can be done following the steps

Loading data

The input file¹ should have the following format.

• The first column represents an unique id for the record.
• The second and third column represent the latitute and longitud of where the sample was taken
• The fourth and beyond represents the different measured variables

fileInput<-system.file("testdata", "chen.csv", package="Irescale")
head(read.csv(fileInput))

To load data to performe the analysis is quite simple. The function loadFile provides the interface to make it. loadFile returns a list with two variables, data and varOfInterest, the first one represents a vector with latitude and longitude; varOfInterest is a matrix with all the measurements from the field.

library(Irescale)
fileInput<-system.file("testdata", "chen.csv", package="Irescale")
input<-loadFile(fileInput)
head(input$data)
head(input$varOfInterest)

If the data has a chessboard shape,the file is organized in rows and columns, where the rows represent latitute and columns longitude, the measurements are in the cell. The function loadChessBoard can be used to load into the analysis.

library(Irescale)
fileInput<-"../inst/testdata/chessboard.csv"
input<-loadChessBoard(fileInput)
head(input$data)
head(input$varOfInterest)

Calculate Distance

Once the data is loaded, The distance matrix, the distance between all the points might be calcualted. The distance can be calculated using `calculateEuclideanDistance’ if the points are taken in a geospatial location.

library(Irescale)
fileInput<-system.file("testdata", "chen.csv", package="Irescale")
input<-loadFile(fileInput)
distM<-calculateEuclideanDistance(input$data)
distM[1:5,1:5]

If the data is taken from a chessboard a like field, the Manhattan distance can be used.

library(Irescale)
fileInput<-"../inst/testdata/chessboard.csv"
input<-loadChessBoard(fileInput)
distM<-calculateManhattanDistance(input$data)
distM[1:5,1:5]

Calculate Weighted Distance Matrix

The weighted distance matrix can be calculated it using the function calculateWeightedDistMatrix, however it is not required to do it, because ‘calculateMoranI’ does it.

library(Irescale)
fileInput<-system.file("testdata", "chen.csv", package="Irescale")
input<-loadFile(fileInput)
distM<-calculateEuclideanDistance(input$data)
distW<-calculateWeightedDistMatrix(distM)
distW[1:5,1:5]

Moran’s I

It is time to calculate the spatial autocorrelation statistic Morans’ I. The function calcualteMoranI, which requires the distance matrix, and the variable you want are interested on.

library(Irescale)
fileInput<-system.file("testdata", "chen.csv", package="Irescale")
input<-loadFile(fileInput)
distM<-calculateEuclideanDistance(input$data)
I<-calculateMoranI(distM = distM,varOfInterest = input$varOfInterest)
I

Resampling Method for I

The scaling process is made using Monte Carlo resampling method. The idea is to shuffle the values and recalculate I for at least 1000 times. In the code below, after resampling the value of I, a set of statistics are calculated for that generated vector.

library(Irescale)
fileInput<-system.file("testdata", "chen.csv", package="Irescale")
input<-loadFile(fileInput)
distM<-calculateEuclideanDistance(input$data)
I<-calculateMoranI(distM = distM,varOfInterest = input$varOfInterest)
vI<-resamplingI(1000,distM, input$varOfInterest) # This is the permutation
statsVI<-summaryVector(vI)
statsVI

Plotting Distribution (Optional)

To see how the value of I is distribuited, the method plotHistogramOverlayNormal provides the functionality to get a histogram of the vector generated by resampling with a theorical normal distribution overlay.

library(Irescale)
fileInput<-system.file("testdata", "chen.csv", package="Irescale")
input<-loadFile(fileInput)
distM<-calculateEuclideanDistance(input$data)
I<-calculateMoranI(distM = distM,varOfInterest = input$varOfInterest)
vI<-resamplingI(1000,distM, input$varOfInterest) # This is the permutation
statsVI<-summaryVector(vI)
plotHistogramOverlayNormal(vI,statsVI, main=colnames(input$varOfInterest))

Rescaling I

Once we have calculated the null distribution via resampling, you need to scale by centering and streching. The method iCorrection, return an object with the resampling vector rescaled, and all the summary for this vector, the new value of I is returned in a variable named newI

library(Irescale)
fileInput<-system.file("testdata", "chen.csv", package="Irescale")
input<-loadFile(fileInput)
distM<-calculateEuclideanDistance(input$data)
I<-calculateMoranI(distM = distM,varOfInterest = input$varOfInterest)
vI<-resamplingI(1000,distM, input$varOfInterest) # This is the permutation
statsVI<-summaryVector(vI)
corrections<-iCorrection(I,vI)
corrections$newI

Calculate P-value

In order to provide a significance to this new value, you can calculate the pvalue using the method calculatePvalue. This method requires the scaled vector, you get this vector,scaledData, the scaled I, newI and the mean of the scaledData.

library(Irescale)
fileInput<-system.file("testdata", "chen.csv", package="Irescale")
input<-loadFile(fileInput)
distM<-calculateEuclideanDistance(input$data)
I<-calculateMoranI(distM = distM,varOfInterest = input$varOfInterest)
vI<-resamplingI(1000,distM, input$varOfInterest) # This is the permutation
statsVI<-summaryVector(vI)
corrections<-iCorrection(I,vI)
pvalueIscaled<-calculatePvalue(corrections$scaledData,corrections$newI,corrections$summaryScaledD$mean)
pvalueIscaled

Stability Analysis

In order to determine how many iterations it is necessary to run the resampling method, it is possible to run a stability analysis. This function draw a chart in log scale (10^x) of the number of interations needed to achieve the stability in the Monte Carlo simulation.

fileInput<-system.file("testdata", "chen.csv", package="Irescale")
input<-loadFile(fileInput)
resultsChen<-buildStabilityTable(data=input, times=100, samples=1000, plots=TRUE)