The transition rates that make up matrix population models (MPMs) generally reflect products of two or more vital rates (sometimes called ‘lower-level vital rates’). Assuming a post-breeding census design, we can retroactively break apart each transition rate into at least two vital rate components: survival, and ‘something’ conditional on survival. That ‘something’ might be growth, shrinkage, stasis, dormancy, fecundity, or clonality.
The vr_ group of functions can be used to derive vital rates from any MPM that was initially estimated using a post-breeding census design. The vital rates may be summarized across the entire MPM (vr_ functions), summarized within stage classes (vr_vec_ functions), or not summarized (vr_mat_ functions).
library(Rage)We’ll start by creating an MPM based on a set of underlying vital rates. Our MPM will be separated into a growth/survival component (matU) and a sexual reproduction component (matF), and consist of 4 stage classes: ‘seed’, ‘small’, ‘large’, and ‘dormant’. First we’ll specify the vital rates.
## survival probabilities
s1 <- 0.20 # seed
s2 <- 0.40 # small
s3 <- 0.50 # large
s4 <- 0.30 # dormant
## matU vital rates conditional on survival (growth, shrinkage, stasis, etc.)
g12 <- 0.15 # seed to small (growth)
g13 <- 0.05 # seed to large (growth)
g11 <- 1 - g12 - g13 # seed to seed (stasis)
g23 <- 0.45 # small to large (growth)
g24 <- 0.10 # small to dormant (enter dormancy)
g22 <- 1 - g23 - g24 # small to small (stasis)
g34 <- 0.22 # large to dormant (enter dormancy)
g33 <- 1 - g34 # large to large (stasis)
g43 <- 0.50 # dormant to large (exit dormancy)
g44 <- 1 - g43 # dormant to dormant (stasis)
## matF vital rates conditional on survival (i.e. fecundity)
f2 <- 0.4 # small
f3 <- 1.1 # largeNext we’ll use the vital rates to construct an MPM, based on a post-breeding census design.
# growth/survival component
matU <- rbind(c(s1*g11, 0, 0, 0),
c(s1*g12, s2*g22, 0, 0),
c(s1*g13, s2*g23, s3*g33, s4*g43),
c( 0, s2*g24, s3*g34, s4*g44))
# sexual reproduction component
matF <- rbind(c( 0, s2*f2, s3*f3, 0),
c( 0, 0, 0, 0),
c( 0, 0, 0, 0),
c( 0, 0, 0, 0))Given a post-breeding census design, stage-specific vital rates of survival can be obtained by taking column sums of the U matrix (matU in our code). This works out algebraically because the other vital rates within matU, which are conditional on survival, must sum to 1 within a given stage class. We can obtain a vector of stage-specific vital rates of survival using the vr_vec_survival() function, which, for simple cases, is equivalent to colSums().
(surv <- vr_vec_survival(matU))
#> [1] 0.2 0.4 0.5 0.3
# equivalent to...
(surv <- colSums(matU))
#> [1] 0.2 0.4 0.5 0.3As expected, these values match the survival probabilities that we initially specified.
To obtain the other set of vital rates — vital rates conditional on survival (sometimes called ‘survival-independent vital rates’) — we simply need to divide each column of matU or matF by the corresponding survival probability. This procedure is implemented by the vr_mat_ functions.
# matU vital rates conditional on survival
vr_mat_U(matU)
#> [,1] [,2] [,3] [,4]
#> [1,] 0.80 NA NA NA
#> [2,] 0.15 0.45 NA NA
#> [3,] 0.05 0.45 0.78 0.5
#> [4,] NA 0.10 0.22 0.5
# matF vital rates conditional on survival
vr_mat_R(matU, matF)
#> [,1] [,2] [,3] [,4]
#> [1,] NA 0.4 1.1 NA
#> [2,] NA NA NA NA
#> [3,] NA NA NA NA
#> [4,] NA NA NA NAWe’ve now recovered all the vital rates that we initially specified when we constructed our MPM.
The vital rates produced by vr_mat_U() represent a variety of processes, including growth, shrinkage, stasis, and dormancy. To summarize these processes within stage classes we can use the vr_vec_ group of functions, which simply sum the vital rates corresponding to a given process within stage classes.
We’ll start by examining vital rates of growth, which will be found in the bottom-left triangle of the U matrix. Given the results from vr_mat_U() above, our baseline expectation for the stage-specific vital rates of growth would be 0.20 (0.15 + 0.05), 0.55 (0.45 + 0.10), 0.22, and NA.
vr_vec_growth(matU)
#> [1] 0.20 0.55 0.22 NAHowever, the calculations above include transitions to the dormant stage class as a component of ‘growth’, because the dormant stage class is represented by the right-most column (and so transitions to the dormant stage are in the bottom-left triangle of matU). To exclude transitions to the dormant stage from our calculation of growth, we can set the exclude_row argument to 4, so that any survival-independent transition to stage 4 is excluded from the calculation of growth.
vr_vec_growth(matU, exclude_row = 4)
#> [1] 0.20 0.45 NA NANext let’s examine vital rates of shrinkage, which will occur in the top-right triangle of matU. Based again on the results from vr_mat_U(), our naive expectation for vital rates of shrinkage would be NA, NA, NA, 0.5.
vr_vec_shrinkage(matU)
#> [1] NA NA NA 0.5However, in this case, the transition from the dormant stage to the large stage is being mistakenly considered as shrinkage, simply because it’s in the top-right triangle of matU. To exclude transitions from the dormant stage from our calculations, we can set the exclude_col argument to 4. Note that we use exclude_row to exclude transitions to a given stage, and exclude_col to exclude transitions from a given stage.
vr_vec_shrinkage(matU, exclude_col = 4)
#> [1] NA NA NA NANext let’s calculate vital rates of stasis, which occur along the diagonal of matU. Depending on our purpose, we may or may not consider the dormant to dormant transition as ‘stasis’. If not, we could exclude it using one of the exclude_ arguments, as above. But we’ll leave it in for now.
vr_vec_stasis(matU)
#> [1] 0.80 0.45 0.78 0.50Finally, let’s calculate vital rates for entering and exiting dormancy. For these, we’ll need to explicitly specify which stage(s) are dormant using the dorm_stages argument.
vr_vec_dorm_enter(matU, dorm_stages = 4)
#> [1] NA 0.10 0.22 NA
vr_vec_dorm_exit(matU, dorm_stages = 4)
#> [1] NA NA NA 0.5The survival-independent vital rates of fecundity produced by vr_mat_R() are more straightforward to summarize, as they only reflect a single process (i.e. fecundity).
vr_vec_reproduction(matU, matF)
#> [1] NA 0.4 1.1 NAIn the example MPM we’re using here, individuals produced by fecundity always begin life in the ‘seed’ stage. However, for some life cycles there are multiple stages in which an offspring could begin life. In these cases, it may be desirable to weight the different types of offspring when summing vital rates of fecundity within a stage class (e.g. by their reproductive value). This type of weighting can be accomplished with the weights_row argument.
In some cases, it may be desirable to summarize vital rates across stage classes to obtain a single mean vital rate for the entire MPM. This can be done using the vr_ group of functions.
By default, the vr_ functions take a simple average of the stage-specific vital rates returned by the corresponding vr_vec_ function. Here’s an example with growth.
vr_growth(matU, exclude_row = 4)
#> [1] 0.325
# equivalent to
(vec_growth <- vr_vec_growth(matU, exclude_row = 4))
#> [1] 0.20 0.45 NA NA
mean(vec_growth, na.rm = TRUE)
#> [1] 0.325Note that the two stage classes from which there are no growth transitions do not contribute to the MPM-average vital rate of growth. In practice, this is because the vr_vec_ functions return NAs rather than 0s for stages that do not exhibit the relevant transition type. This is an important issue that we’ll return to in a later section.
Rather than taking a simple average of the given vital rate across stage classes, we may wish to take a weighted average across stage classes. For instance, we may wish to weight stage classes based on the stable distribution at equilibrium. Here’s an example of how to do that using the weights_col argument.
# calculate the stable distribution using popdemo::eigs
library(popdemo)
matA <- matU + matF
w <- popdemo::eigs(matA, what = "ss")
# calculate mean vital rate of growth weighted by the stable distribution
vr_growth(matU, exclude_row = 4, weights_col = w)
#> [1] 0.2220831
# equivalent to
pos <- !is.na(vec_growth) # possible transitions
sum(vec_growth[pos] * w[pos]) / sum(w[pos]) # weighted average
#> [1] 0.2220831By default, all vr_ functions assume that a transition rate of 0 indicates an impossible transition within the given life cycle (e.g. tadpoles never revert to eggs), in which case a value of NA will be used in any relevant calculations. However, a transition rate of 0 could alternatively indicate a transition that is generally possible, but was simply estimated to be 0 in the relevant population and time period.
This distinction between possible and impossible transitions can be important when calculating vital rates — particularly if we want to summarize vital rates across stages (i.e. summarize at the level of the MPM).
Let’s consider the same matU we defined above, but imagine that it reflects a life cycle with a different set of stages: ‘seed’, ‘small’, ‘medium’, and ‘large’. Now our MPM has a single shrinkage transition (large to medium). If we summarize the vital rate of shrinkage across stages using vr_shrinkage(), we’ll simply recover the single shrinkage vital rate from the large to medium transition (i.e. because the other stages, with no shrinkage, do not contribute to the average).
vr_vec_shrinkage(matU)
#> [1] NA NA NA 0.5
vr_shrinkage(matU)
#> [1] 0.5However, imagine now that the medium to small transition, which is 0 within matU, is in fact a possible shrinkage transition in our life cycle of interest — its rate was simply estimated to be 0 in the relevant sample and time period. In this case, we’ll need to manually specify the matrix of possible transitions using the posU argument.
(pos <- matU > 0) # possible transitions based on matU
#> [,1] [,2] [,3] [,4]
#> [1,] TRUE FALSE FALSE FALSE
#> [2,] TRUE TRUE FALSE FALSE
#> [3,] TRUE TRUE TRUE TRUE
#> [4,] FALSE TRUE TRUE TRUE
pos[2,3] <- TRUE # set medium-to-small shrinkage tr to possible
vr_vec_shrinkage(matU, posU = pos)
#> [1] NA NA 0.0 0.5
vr_shrinkage(matU, posU = pos)
#> [1] 0.25Now, instead of returning NA for the vital rate of shrinkage from the medium stage class, vr_vec_shrinkage() returns a value of 0. Correspondingly, vr_shrinkage() incorporates this 0 into its calculation and returns an MPM-average shrinkage rate of 0.25 (mean(c(0, 0.5)) rather than 0.5, as before.
Caswell, H. (2001). Matrix Population Models: Construction, Analysis, and Interpretation. 2nd edition. Sinauer Associates, Sunderland, MA. ISBN-10: 0878930965