Setting steady-state compartments

2022-03-23

In some experiments, you might want to specify that some compartments are in a steady-state: their size and tracer content will not change due to nutrient flows from or into other compartments. This is equivalent to having an infinitely buffered compartment, and it is useful to model some real-life situations such as:

In this tutorial, we will learn how to define a compartment as being in a steady state in a network model.

library(isotracer)
library(tidyverse)

Data preparation

The simulated data we use in this example can be loaded into your R session by running the code below:

exp <- tibble::tribble(
  ~time.day,    ~species, ~biomass, ~prop15N,    ~transect,
          0,       "NH4",    0.313,   0.0259, "transect_1",
          4,       "NH4",   0.2675,       NA, "transect_1",
          8,       "NH4",       NA,   0.0246, "transect_1",
         12,       "NH4",       NA,   0.0214, "transect_1",
         16,       "NH4",   0.3981,   0.0241, "transect_1",
         20,       "NH4",   0.3414,       NA, "transect_1",
          0, "epilithon",  89.2501,   0.0022, "transect_1",
          4, "epilithon",  93.8583,   0.0129, "transect_1",
          8, "epilithon",       NA,   0.0224, "transect_1",
         12, "epilithon", 112.5986,   0.0262, "transect_1",
         16, "epilithon",       NA,   0.0252, "transect_1",
         20, "epilithon",  80.0911,   0.0224, "transect_1",
          0,       "NH4",   0.3525,   0.0236, "transect_2",
          4,       "NH4",   0.2881,       NA, "transect_2",
          8,       "NH4",   0.2436,       NA, "transect_2",
         12,       "NH4",   0.3392,   0.0299, "transect_2",
         16,       "NH4",    0.212,   0.0177, "transect_2",
         20,       "NH4",   0.3818,   0.0307, "transect_2",
          0, "epilithon",  127.873,   0.0029, "transect_2",
          4, "epilithon",       NA,   0.0117, "transect_2",
          8, "epilithon",       NA,   0.0177, "transect_2",
         12, "epilithon",  88.6496,   0.0189, "transect_2",
         16, "epilithon",       NA,   0.0231, "transect_2",
         20, "epilithon",  87.7534,   0.0243, "transect_2"
  )

The simulated experiment is taking place in a stream at two locations (transect_1 and transect_2). The network we want to model has two compartments: the ammonium NH\(_4^+\) dissolved in the stream water and the algae growing on the stream bed (epilithon) which can assimilate ammonium from the water.

Let’s have a look at the data:

library(ggplot2)
library(gridExtra)
p1 <- ggplot(exp, aes(x = time.day, y = biomass, col = species)) +
    geom_point() + ggtitle("Biomass data") + ylab("Biomass (mg N / m2)") +
    facet_wrap(~ transect)
p2 <- ggplot(exp, aes(x = time.day, y = prop15N, col = species)) +
    geom_point() + ggtitle("Heavy isotope proportions") + ylab("Proportion of 15N")  +
    facet_wrap(~ transect)
grid.arrange(p1, p2, nrow = 2)

plot of chunk unnamed-chunk-4

Because the water is constantly flowing in the stream, we will consider that ammonium is in a steady state at the local scale of a transect (i.e. whatever is consumed by epilithon is replenished by the incoming water). The dissolved ammonium is experimentally enriched in \(^{15}\)N compared to background levels by dripping a solution of \(^{15}\)N-enriched ammonium at a constant rate upstream of each transect (the dripping starts at the beginning of the experiment). This is why the proportion of \(^{15}\)N in ammonium is higher than in epilithon at the beginning of the experiment.

As long as the drip is also stable during the experiment, the assumption of steady state for dissolved ammonium holds. We will learn in the next tutorial how we can specify more complicated addition events, such as pulses or on/off drip regimes.

Building the network model

Let’s start by creating a new network model and specifying its topology:

m <- new_networkModel() %>% set_topo("NH4 -> epilithon")

The next step is to define the initial conditions. In our simulated experiment, the data comes from measurements in a stream, not from a controlled aquarium, so the initial conditions are not as certain as in a controlled experiment. We will assume that a good guess for initial biomasses are the mean biomasses measured in each transect:

init_bm <- exp %>%
    group_by(species, transect) %>%
    summarize(biomass = mean(biomass, na.rm = TRUE))
## `summarise()` has grouped output by 'species'. You can override using the `.groups`
## argument.
init_bm
## # A tibble: 4 × 3
## # Groups:   species [2]
##   species   transect   biomass
##   <chr>     <chr>        <dbl>
## 1 epilithon transect_1  93.9  
## 2 epilithon transect_2 101.   
## 3 NH4       transect_1   0.33 
## 4 NH4       transect_2   0.303

For the initial proportion of \(^{15}\)N in the dissolved ammonium, we will also use mean values since we expect ammonium to be in a steady state during the experiment (the drip is on during the whole experiment):

init_prop_NH4 <- exp %>%
    filter(species == "NH4") %>%
    group_by(transect, species) %>%
    summarize(prop15N = mean(prop15N, na.rm = TRUE))
## `summarise()` has grouped output by 'transect'. You can override using the `.groups`
## argument.
init_prop_NH4
## # A tibble: 2 × 3
## # Groups:   transect [2]
##   transect   species prop15N
##   <chr>      <chr>     <dbl>
## 1 transect_1 NH4      0.024 
## 2 transect_2 NH4      0.0255

For the epilithon, we know that the proportion of \(^{15}\)N will increase during the experiment, so our best guess is to use only the proportion measured at \(t_0\):

init_prop_epi <- exp %>%
    filter(species == "epilithon" & time.day == 0) %>%
    select(species, prop15N, transect)
init_prop_epi
## # A tibble: 2 × 3
##   species   prop15N transect  
##   <chr>       <dbl> <chr>     
## 1 epilithon  0.0022 transect_1
## 2 epilithon  0.0029 transect_2

Now we can wrap up all those numbers into a single table containing the initial conditions:

init_prop <- bind_rows(init_prop_NH4, init_prop_epi)
inits <- full_join(init_bm, init_prop)
inits
## # A tibble: 4 × 4
## # Groups:   species [2]
##   species   transect   biomass prop15N
##   <chr>     <chr>        <dbl>   <dbl>
## 1 epilithon transect_1  93.9    0.0022
## 2 epilithon transect_2 101.     0.0029
## 3 NH4       transect_1   0.33   0.024 
## 4 NH4       transect_2   0.303  0.0255

We can use this table to specify the initial conditions of the model:

m <- m %>% set_init(inits, comp = "species", size = "biomass", prop = "prop15N",
                    group_by = "transect")

We finally add all the observations:

m <- m %>% set_obs(exp, time = "time.day")
m
## # A tibble: 2 × 5
##   topology           initial          observations      parameters       group    
##   <list>             <list>           <list>            <list>           <list>   
## 1 <topology [2 × 2]> <tibble [2 × 3]> <tibble [12 × 4]> <tibble [5 × 2]> <chr [1]>
## 2 <topology [2 × 2]> <tibble [2 × 3]> <tibble [12 × 4]> <tibble [5 × 2]> <chr [1]>

Let’s check the grouping structure of our model:

groups(m)
## # A tibble: 2 × 1
##   transect  
##   <chr>     
## 1 transect_1
## 2 transect_2

Good!

Specifying steady-state compartments

The last step before we can run the MCMC is to specify that the NH\(_4^+\) compartment is in steady state. Let’s have a look at the current topology of the model:

topo(m)
## <2 comps> 
##           epilithon NH4
## epilithon         0   1
## NH4               0   0

All compartments in the current topology are “standard” compartments (i.e. not in imposed steady-state). We use the set_steady() function to indicate which compartments are to be considered into steady-state:

m <- m %>% set_steady(comps = "NH4")

NH4 is set to steady-state: the compartment size and the proportion of \(^{15}\)N for NH4 will be considered constant within each replicate. Let’s look again at the topology:

topo(m)
## <2 comps> 
##           epilithon NH4*
## epilithon         0    1
## NH4*              0    0
## [ * : steady-state]

NH\(_4^+\) is now marked with an asterisk, which indicates a steady state compartment. We are ready to run the MCMC.

Running the MCMC

As usual, we need to specify the priors for the parameters we will be sampling during MCMC run:

priors(m)
## # A tibble: 5 × 2
##   in_model                 prior 
##   <chr>                    <list>
## 1 eta                      <NULL>
## 2 lambda_epilithon         <NULL>
## 3 lambda_NH4               <NULL>
## 4 upsilon_NH4_to_epilithon <NULL>
## 5 zeta                     <NULL>

Since NH\(_4^+\) is in a steady state in the model, the lambda_NH4 parameter will not influence the likelihood of the model, so let’s just set it to a constant so that the sampler does not waste efforts on it:

m <- set_priors(m, constant_p(0), "lambda_NH4")

The observation times were in days, and it is unlikely than the loss rate for epilithon will be more than 1 per day, so normal_p(0, 1) is quite generous:

m <- set_priors(m, normal_p(0, 1), "lambda_epilithon")

What about upsilon_NH4_to_epilithon? NH4 is a small compartment, but it is in steady state because it is constantly renewed by the stream flow. This means that the uptake rate from this compartment can be very large, without depleting it.

To get an idea of how big it could be, how large would it need to be to renew all of epilithon compartment during a day? For an epilithon biomass of 100 and an NH4 biomass of 0.3, the rate would need to be about 333 per day. Let’s set a prior which would allow it but with a lot more probability mass below 333:

m <- set_prior(m, normal_p(0, 350), "upsilon_NH4_to_epilithon")
## Prior modified for parameter(s): 
##   - upsilon_NH4_to_epilithon

Finally, here eta and zeta represent coefficients of variation for the observations. A reasonable prior could be:

# "eta" will match both `eta` and `zeta`
m <- set_priors(m, normal_p(0, 5), "eta")

Let’s have a look at all our priors and then run the model:

priors(m)
## # A tibble: 5 × 2
##   in_model                 prior                       
##   <chr>                    <list>                      
## 1 eta                      <trun_normal(mean=0,sd=5)>  
## 2 lambda_epilithon         <trun_normal(mean=0,sd=1)>  
## 3 lambda_NH4               <constant(value=0)>         
## 4 upsilon_NH4_to_epilithon <trun_normal(mean=0,sd=350)>
## 5 zeta                     <trun_normal(mean=0,sd=5)>
run <- run_mcmc(m, iter = 1000)
plot(run)
# Note: the figure below only shows a few of the traceplots for vignette concision

plot of chunk unnamed-chunk-23

The traces look good. Let’s do a posterior predictive check to ensure that the model makes sense:

predictions <- predict(m, run)
plot(predictions, facet_row = "group")

plot of chunk unnamed-chunk-25

Let’s use a log scale on the y axis to make visualization of the two compartments in the same plots easier:

plot(predictions, facet_row = "group", log = TRUE)

plot of chunk unnamed-chunk-26

The model looks ok.

In the next tutorial, you will learn how to specify more complex addition regimes using pulse and drip events.