Illustration 1
Fitting a simple model and evaluating the results.
Load the package and data simdata1.
Now, inspect the tree and the substitution rate matrix used to simulate data in simdata1.
ape::plot.phylo(simdata1$tree, edge.width = 2, show.tip.label = FALSE, no.margin = TRUE)
ape::nodelabels(frame = "circle", cex = 0.7)
ape::tiplabels(frame = "circle", cex = 0.7)
## [,1] [,2]
## [1,] -1.0 1.0
## [2,] 0.6 -0.6In this example, Q is a standard substitution rate matrix used to simulate two character states data for the tips of the phylogeny. Here, equal character frequencies were assumed at the root during simulation. Confirming the number of character states and inspecting the character frequencies at the tips of the phylogeny is straightforward.
##
## 1 2
## 8814 11186Now, using the function estimaterates from the markophylo package, we will estimate a substitution rate matrix from this data. The modelmat argument represents the number of unique rates to be fit using a 2-dimensional matrix, with the diagonals left as NA (see section on creating modelmat below). The model can be fitted in one of two ways:
model1 <- estimaterates(usertree = simdata1$tree, userphyl = simdata1$data,
alphabet = c(1, 2), rootprob = "equal",
modelmat = matrix(c(NA, 1, 2, NA), 2, 2))
print(model1)## Call:
## estimaterates(usertree = simdata1$tree, userphyl = simdata1$data,
## alphabet = c(1, 2), modelmat = matrix(c(NA, 1, 2, NA), 2,
## 2), rootprob = "equal")
##
## 4 taxa with 5000 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 1 2 3 4 5 6 7
##
## -----------------------------------
## Parameter Index Matrix
## 1 2
## 1 NA 2
## 2 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1]
## [1,] 0.5680754
## [2,] 1.0111462
##
##
## $se
## $se$rates
## , , 1
##
## [,1]
## [1,] 0.02315191
## [2,] 0.03119170
##
##
##
## -----------------------------------
## Log-likelihood for model wop : -10055.02
## AIC for model wop : -20114.03
## BIC for model wop : -20127.07
## -----------------------------------
## Time taken: 0.129 seconds.OR
model1 <- estimaterates(usertree = simdata1$tree, userphyl = simdata1$data,
alphabet = c(1, 2), rootprob = "equal",
modelmat = "ARD")
print(model1)The second code block is using the “ARD” option for modelmat which automatically uses a two state substitution rate matrix here with two rates to be estimated. The output from printing model1 (which is an object of class ‘markophylo’) is self-explanatory. The estimated rates (given as an array in $rates) and the standard errors (both indexed according to the parameter index matrix) are output. The log-likelihood at the maximum likelihood estimates along with the values of the model selection criteria (Akaike information criterion and Bayesian information criterion) are also provided. Because we did not specify a priori any clades to be fit with their own unique rates, these estimates are homogenous over the tree. This is also reflected in the one component list output under “Groups of nodes with the same rates”. Note that the model1 object is of class markophylo.
## [1] "markophylo"Among other things, model1 contains the number of unique patterns observed that can be retreived using model1$w. As expected, for binary discrete characters for four taxa, there are 2^4 unique patterns. These patterns can also be calculated by providing the data set directly to the patterns function.
|
Correcting for unobservable patterns
It is often very important to correct for sampling bias (aka acquisition or ascertainment bias). This could be important in many diverse scenarios and has been corrected for in many previous methodologies. For example, this correction has been used in the following cases:
- Analysis of restriction site data (Felsenstein, 1992).
- Only characters that are non-constant were recorded in the data (Lewis, 2001).
- Ancient genes that are lost from all taxa of interest cannot be observed at the tips (Hao and Golding, 2006).
- A gene family does not appear in the COG database unless it occurs in at least three genomes (Cohen and Pupko, 2010).
In such a case, certain character patterns for the taxa of interest are not available in the data. For example, let’s see what happens if we estimate the rates of interest on the data used above in Illustration 1 that was filtered to remove all non-variable character patterns.
filterall1 <- which(apply(simdata1$data, MARGIN = 1, FUN =
function(x) isTRUE(all.equal(as.vector(x), c(1, 1, 1, 1)))))
filterall2 <- which(apply(simdata1$data, MARGIN = 1, FUN =
function(x) isTRUE(all.equal(as.vector(x), c(2, 2, 2, 2)))))
filteredsimdata1 <- simdata1$data[-c(filterall1, filterall2), ]
model1_f <- estimaterates(usertree = simdata1$tree, userphyl = filteredsimdata1,
alphabet = c(1, 2), rootprob = "equal",
modelmat = "ARD")
print(model1_f)## Call:
## estimaterates(usertree = simdata1$tree, userphyl = filteredsimdata1,
## alphabet = c(1, 2), modelmat = "ARD", rootprob = "equal")
##
## 4 taxa with 2128 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 1 2 3 4 5 6 7
##
## -----------------------------------
## Parameter Index Matrix
## 1 2
## 1 NA 2
## 2 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1]
## [1,] 3.127061
## [2,] 3.196739
##
##
## $se
## $se$rates
## , , 1
##
## [,1]
## [1,] 0.1191886
## [2,] 0.1197627
##
##
##
## -----------------------------------
## Log-likelihood for model wop : -5546.87
## AIC for model wop : -11097.74
## BIC for model wop : -11109.07
## -----------------------------------
## Time taken: 0.082 seconds.Clearly, there is a big difference as compared to the output from earlier. However, it is easy to correct for such sampling bias using the estimaterates function by providing a matrix with each row representing a unique unobservable pattern in the data. Here, a matrix with 2 rows, the first row all ones, and the second row all twos is supplied to the unobserved argument.
model1_f_corrected <- estimaterates(usertree = simdata1$tree, userphyl = filteredsimdata1,
unobserved = matrix(c(1, 1, 1, 1, 2, 2, 2, 2), nrow = 2,
byrow = TRUE), alphabet = c(1, 2),
rootprob = "equal", modelmat = "ARD")
print(model1_f_corrected)## Call:
## estimaterates(usertree = simdata1$tree, userphyl = filteredsimdata1,
## unobserved = matrix(c(1, 1, 1, 1, 2, 2, 2, 2), nrow = 2,
## byrow = TRUE), alphabet = c(1, 2), modelmat = "ARD",
## rootprob = "equal")
##
## 4 taxa with 2128 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 1 2 3 4 5 6 7
##
## -----------------------------------
## Parameter Index Matrix
## 1 2
## 1 NA 2
## 2 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1]
## [1,] 0.6090545
## [2,] 0.9718825
##
##
## $se
## $se$rates
## , , 1
##
## [,1]
## [1,] 0.06027376
## [2,] 0.09918309
##
##
##
## -----------------------------------
## Log-likelihood for model wop : -4712.739
## AIC for model wop : -9429.478
## BIC for model wop : -9440.804
## -----------------------------------
## Time taken: 0.08 seconds.##Illustration 2: branch rate heterogeneity
Here, a more complicated model is fit with certain clades following rates separate from the rest of the tree. While simulating the data found in simdata2, the clade with node 7 as its most recent common ancestor (MRCA) was constrained to have twice the substitution rates as the rest of the branches in the tree.
## [,1] [,2]
## [1,] -1.0 1.0
## [2,] 0.6 -0.6##
## 1 2
## 8714 11286While fitting the model, we hypothesize that the clade with node 7 as its most recent common ancestor (MRCA) follows substitution rates unique from the rest of the tree.
model2 <- estimaterates(usertree = simdata2$tree, userphyl = simdata2$data,
alphabet = c(1, 2), bgtype = "ancestornodes", bg = c(7),
rootprob = "equal", modelmat = "ARD")
print(model2)## Call:
## estimaterates(usertree = simdata2$tree, userphyl = simdata2$data,
## alphabet = c(1, 2), modelmat = "ARD", bgtype = "ancestornodes",
## bg = c(7), rootprob = "equal")
##
## 4 taxa with 5000 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 7 3 4
##
## [[2]]
## [1] 1 2 5 6 7
##
## -----------------------------------
## Parameter Index Matrix
## 1 2
## 1 NA 2
## 2 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1] [,2]
## [1,] 1.125722 0.5586981
## [2,] 2.001023 1.0061919
##
##
## $se
## $se$rates
## , , 1
##
## [,1] [,2]
## [1,] 0.0720312 0.02677063
## [2,] 0.1055549 0.03522507
##
##
##
## -----------------------------------
## Log-likelihood for model wop : -10893.48
## AIC for model wop : -21794.97
## BIC for model wop : -21821.03
## -----------------------------------
## Time taken: 0.235 seconds.This could also have been accomplished by providing a list with each component representing the node labels, i.e., group of branches, that follow the same rate(s). The node labels can be seen with
ape::plot.phylo(simdata2$tree, edge.width = 2, show.tip.label = FALSE, no.margin = TRUE)
ape::nodelabels(frame = "circle", cex = 0.7)
ape::tiplabels(frame = "circle", cex = 0.7) Now,
model2_2 <- estimaterates(usertree = simdata2$tree, userphyl = simdata2$data,
alphabet = c(1, 2), bgtype = "listofnodes", bg = list(c(3,4,7),c(1,2,5,6,7)),
rootprob = "equal", modelmat = "ARD")
print(model2_2)## Call:
## estimaterates(usertree = simdata2$tree, userphyl = simdata2$data,
## alphabet = c(1, 2), modelmat = "ARD", bgtype = "listofnodes",
## bg = list(c(3, 4, 7), c(1, 2, 5, 6, 7)), rootprob = "equal")
##
## 4 taxa with 5000 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 3 4 7
##
## [[2]]
## [1] 1 2 5 6 7
##
## -----------------------------------
## Parameter Index Matrix
## 1 2
## 1 NA 2
## 2 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1] [,2]
## [1,] 1.125722 0.5586981
## [2,] 2.001023 1.0061919
##
##
## $se
## $se$rates
## , , 1
##
## [,1] [,2]
## [1,] 0.0720312 0.02677063
## [2,] 0.1055549 0.03522507
##
##
##
## -----------------------------------
## Log-likelihood for model wop : -10893.48
## AIC for model wop : -21794.97
## BIC for model wop : -21821.03
## -----------------------------------
## Time taken: 0.24 seconds.In the output, groups of nodes that delimit the branches that follow the same rates (within groups) are displayed as two vector components of an array. The estimated rates then follow the ordering of these components. Generally, the output rates in the first column are the estimated rates (as indexed by the parameter index matrix) for the first group, the second column for the second group, and so on. To get a visual confirmation of the different branches following their own unique rates, the following command can be used:
plottree(model2, colors=c("blue", "darkgreen"), edge.width = 2, show.tip.label = FALSE,
no.margin = TRUE)
ape::nodelabels(frame = "circle", cex = 0.7)
ape::tiplabels(frame = "circle", cex = 0.7)
##Illustration 3: partition models.
Here, a partition analysis is carried out. Nucleotide data was simulated such that the first half of sites followed substitution rates different from the other half of sites. Data was simulated in the two partitions with rates \(0.33\) and \(0.99\). While specifying the model, a list of two components then needs to be supplied to the function. To specify the partition with the two matrices, list(c(1:2500), c(2501:5000)) can be used. Note also that our alphabet here consists of the four nucleotide bases.
## [1] 5000 4##
## a c g t
## 5092 5048 4973 4887model3 <- estimaterates(usertree = simdata3$tree, userphyl = simdata3$data,
alphabet = c("a", "c", "g", "t"), rootprob = "equal",
partition = list(c(1:2500), c(2501:5000)),
modelmat = "ER")
print(model3)## Call:
## estimaterates(usertree = simdata3$tree, userphyl = simdata3$data,
## alphabet = c("a", "c", "g", "t"), modelmat = "ER", partition = list(c(1:2500),
## c(2501:5000)), rootprob = "equal")
##
## 4 taxa with 5000 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 1 2 3 4 5 6 7
##
## -----------------------------------
## Parameter Index Matrix
## a c g t
## a NA 1 1 1
## c 1 NA 1 1
## g 1 1 NA 1
## t 1 1 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1]
## [1,] 0.3451549
##
## , , 2
##
## [,1]
## [1,] 0.9869837
##
##
## $se
## $se$rates
## , , 1
##
## [,1]
## [1,] 0.009154739
##
## , , 2
##
## [,1]
## [1,] 0.02401694
##
##
##
## -----------------------------------
## Log-likelihood for model wop : -21659.38
## AIC for model wop : -43322.75
## BIC for model wop : -43335.79
## -----------------------------------
## Time taken: 0.419 seconds.##Illustration 4: rate variation using the gamma distribution and estimating root probabilities.
Here, an analysis with gamma rate variation is carried out. Data was simulated using a gamma rate distribution with the shape parameter set to \(2\). The overall rate was \(0.33\) while the prior root probabilities used for the simulation were (0.15, 0.35, 0.25, 0.25)'. While specifying the model, the “discgamma” option is used for the ratevar argument with 4 categories specified in nocat. This specifies a discrete gamma approximation that approximates the integral (that would be needed in the likelihood if the continuous gamma distribution was used) at each site by numerical integration. Moreover, instead of assuming equal or stationary root frequencies, or providing user-specified root probabilities, the root probabilities are estimated using maximum likelihood.
##
## a c g t
## 2929 7025 5007 5039model4 <- estimaterates(usertree = simdata4$tree, userphyl = simdata4$data,
alphabet = c("a", "c", "g", "t"), rootprob = "maxlik",
ratevar = "discgamma", nocat = 4,
modelmat = "ER")
print(model4)## Call:
## estimaterates(usertree = simdata4$tree, userphyl = simdata4$data,
## alphabet = c("a", "c", "g", "t"), modelmat = "ER", ratevar = "discgamma",
## nocat = 4, rootprob = "maxlik")
##
## 4 taxa with 5000 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 1 2 3 4 5 6 7
##
## -----------------------------------
## Parameter Index Matrix
## a c g t
## a NA 1 1 1
## c 1 NA 1 1
## g 1 1 NA 1
## t 1 1 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1]
## [1,] 0.332227
##
##
## $alpha
## [1] 1.995157
##
## $alpharates
## [,1] [,2] [,3] [,4]
## [1,] 0.3184452 0.6828827 1.108946 1.889726
##
## $iroot
## [1] 0.1151663 0.3896658 0.2472583 0.2479096
##
## $se
## $se$rates
## , , 1
##
## [,1]
## [1,] 0.008529151
##
##
## $se$alpha
## [1] 0.3139056
##
## $se$iroot
## [1] 0.005504219 0.008271888 0.007391624
##
##
## -----------------------------------
## Log-likelihood for model wop : -17763.33
## AIC for model wop : -35536.65
## BIC for model wop : -35569.24
## -----------------------------------
## Time taken: 2.559 seconds.Correcting for unobservable patterns
Here, let’s see what happens if we estimate the rates of interest on a filtered version of the data used above in Illustration 4. First, the data is filtered to remove all patterns where only “a” was recorded or “g” was recorded more than three times (i.e., three or four times). Note that this arbitrary filtering is done simply to illustrate the ease of adjusting for unobservable data patterns.
filteralla <- which(apply(simdata4$data, MARGIN = 1, FUN =
function(x) isTRUE(all.equal(as.vector(x),
c("a", "a", "a", "a")))))
filterg3 <- which(apply(simdata4$data, MARGIN = 1, FUN =
function(x) table(x)["g"] >= 3) )
filteredsimdata4 <- simdata4$data[-c(filteralla, filterg3), ]
dim(simdata4$data)## [1] 5000 4## [1] 3588 4Now, construct a matrix with all possible combinations (4^4) of the states (alphabet) for four taxa. Using this matrix of all patterns, figure out the set of unique unobservable patterns.
alphabet <- c("a", "c", "g", "t")
allpatt <- expand.grid(alphabet, alphabet, alphabet, alphabet) #all possible combinations
unob_patt_index_1 <- which(apply(allpatt, MARGIN = 1, FUN = function(x) table(x)["g"] >= 3) )
unob_patt_index_2 <- which(apply(allpatt, MARGIN = 1, FUN = function(x)
isTRUE(all.equal(as.vector(x), c("a", "a", "a", "a"))) ) )
unob_patt_indices <- sort(union(unob_patt_index_1, unob_patt_index_2)) #Ordered indices.
unob_patt <- allpatt[unob_patt_indices, ] #matrix of unique patternsFinally, this matrix of unique patterns can be passed to the unobserved argument.
model4_f_corrected <- estimaterates(usertree = simdata4$tree, userphyl = filteredsimdata4,
unobserved = unob_patt,
alphabet = c("a", "c", "g", "t"), rootprob = "maxlik",
ratevar = "discgamma", nocat = 4,
modelmat = "ER")
print(model4_f_corrected)## Call:
## estimaterates(usertree = simdata4$tree, userphyl = filteredsimdata4,
## unobserved = unob_patt, alphabet = c("a", "c", "g", "t"),
## modelmat = "ER", ratevar = "discgamma", nocat = 4, rootprob = "maxlik")
##
## 4 taxa with 3588 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 1 2 3 4 5 6 7
##
## -----------------------------------
## Parameter Index Matrix
## a c g t
## a NA 1 1 1
## c 1 NA 1 1
## g 1 1 NA 1
## t 1 1 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1]
## [1,] 0.3433851
##
##
## $alpha
## [1] 1.980072
##
## $alpharates
## [,1] [,2] [,3] [,4]
## [1,] 0.3165043 0.6813801 1.108845 1.893271
##
## $iroot
## [1] 0.09291071 0.40803868 0.23921649 0.25983412
##
## $se
## $se$rates
## , , 1
##
## [,1]
## [1,] 0.01159982
##
##
## $se$alpha
## [1] 0.3408541
##
## $se$iroot
## [1] 0.01029943 0.01671436 0.02612932
##
##
## -----------------------------------
## Log-likelihood for model wop : -12267.8
## AIC for model wop : -24545.6
## BIC for model wop : -24576.53
## -----------------------------------
## Time taken: 1.907 seconds.##Illustration 5: partition models with separate rate variation in each partition.
Here, simulated data akin to codon data is analyzed. The data can be organized into triplets, with the first two positions following the same substitution rates different from the third position. The data was simulated under the assumption of gamma rate variation with the shape parameters set to \(2\) and \(0.75\) for the set of first two positions and last position, respectively. The overall rate was \(0.33\). The ancestral sequence had the following character frequencies: (0.15, 0.35, 0.25, 0.25)'. If a common gamma distribution over partitions is assumed, “discgamma” should be supplied as the value for argument ratevar. Here, for the model to be fit, a different gamma rate distribution is assumed in each partition using “partitionspecificgamma” as the value for argument ratevar. Hence, a list of two components needs to be specified for argument partition. This can easily be done, for example, the following can be used to specify partitions for \(15\) sites in total with the first (second) component being a vector of the first two (last) positions of triplets.
## [[1]]
## [1] 1 2 4 5 7 8 10 11 13 14
##
## [[2]]
## [1] 3 6 9 12 15Moreover, the root probabilities are estimated using maximum likelihood:
## [1] 6000 4##
## a c g t
## 3664 8274 6206 5856model5 <- estimaterates(usertree = simdata5$tree, userphyl = simdata5$data,
alphabet = c("a", "c", "g", "t"), rootprob = "maxlik",
partition = list((1:6000)[-seq(3, 6000, by = 3)],
seq(3, 6000, by = 3) ),
ratevar = "partitionspecificgamma", nocat = 4,
modelmat = "ER")
print(model5)## Call:
## estimaterates(usertree = simdata5$tree, userphyl = simdata5$data,
## alphabet = c("a", "c", "g", "t"), modelmat = "ER", partition = list((1:6000)[-seq(3,
## 6000, by = 3)], seq(3, 6000, by = 3)), ratevar = "partitionspecificgamma",
## nocat = 4, rootprob = "maxlik")
##
## 4 taxa with 6000 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 1 2 3 4 5 6 7
##
## -----------------------------------
## Parameter Index Matrix
## a c g t
## a NA 1 1 1
## c 1 NA 1 1
## g 1 1 NA 1
## t 1 1 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1]
## [1,] 0.322249
##
## , , 2
##
## [,1]
## [1,] 0.3289606
##
##
## $alpha
## [1] 1.6269642 0.5764484
##
## $alpharates
## [,1] [,2] [,3] [,4]
## [1,] 0.26602897 0.6398516 1.1043454 1.989774
## [2,] 0.04506386 0.3311373 0.9676055 2.656193
##
## $iroot
## [1] 0.1219807 0.3829442 0.2560082 0.2390669
##
## $se
## $se$rates
## , , 1
##
## [,1]
## [1,] 0.009451132
##
## , , 2
##
## [,1]
## [1,] 0.01669983
##
##
## $se$alpha
## [1] 0.24756702 0.06857766
##
## $se$iroot
## [1] 0.005096063 0.007472416 0.006748037
##
##
## -----------------------------------
## Log-likelihood for model wop : -20718.19
## AIC for model wop : -41450.38
## BIC for model wop : -41497.27
## -----------------------------------
## Time taken: 7.885 seconds.##Illustration 6: importing data and fitting a birth death model. Import some simulated data and tree from the web. There are 5000 discrete character patterns (four states in total: 1, 2, 3, and 4) for ten taxa. The data was simulated using a birth death model with rates 1 and 2 and equal base frequencies.
mp_data <- read.table("https://raw.githubusercontent.com/ujdang/miscellaneous/master/mp_example_data", header = TRUE)
mp_tree <- ape::read.tree("https://raw.githubusercontent.com/ujdang/miscellaneous/master/mp_example_tree")
mp_model <- estimaterates(usertree = mp_tree, userphyl = mp_data,
alphabet = c(1, 2, 3, 4), rootprob = "equal",
modelmat = "BD")
print(mp_model)## Call:
## estimaterates(usertree = mp_tree, userphyl = mp_data, alphabet = c(1,
## 2, 3, 4), modelmat = "BD", rootprob = "equal")
##
## 10 taxa with 4999 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
##
## -----------------------------------
## Parameter Index Matrix
## 1 2 3 4
## 1 NA 2 0 0
## 2 1 NA 2 0
## 3 0 1 NA 2
## 4 0 0 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1]
## [1,] 0.9785944
## [2,] 1.9719975
##
##
## $se
## $se$rates
## , , 1
##
## [,1]
## [1,] 0.01491092
## [2,] 0.02187034
##
##
##
## -----------------------------------
## Log-likelihood for model wop : -50189.78
## AIC for model wop : -100383.6
## BIC for model wop : -100396.6
## -----------------------------------
## Time taken: 5.373 seconds.Of course, we could also have estimated the root probabilities easily as seen before.
mp_model_2 <- estimaterates(usertree = mp_tree, userphyl = mp_data,
alphabet = c(1, 2, 3, 4), rootprob = "maxlik",
modelmat = "BD")
print(mp_model_2)## Call:
## estimaterates(usertree = mp_tree, userphyl = mp_data, alphabet = c(1,
## 2, 3, 4), modelmat = "BD", rootprob = "maxlik")
##
## 10 taxa with 4999 discrete character patterns were fitted.
## -----------------------------------
## Groups of nodes with the same rates:
## [[1]]
## [1] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
##
## -----------------------------------
## Parameter Index Matrix
## 1 2 3 4
## 1 NA 2 0 0
## 2 1 NA 2 0
## 3 0 1 NA 2
## 4 0 0 1 NA
## -----------------------------------
## wop
## $rates
## , , 1
##
## [,1]
## [1,] 0.9784229
## [2,] 1.9720672
##
##
## $iroot
## [1] 0.2504584 0.2459896 0.2544246 0.2491274
##
## $se
## $se$rates
## , , 1
##
## [,1]
## [1,] 0.01513158
## [2,] 0.02227382
##
##
## $se$iroot
## [1] 0.007568207 0.008733148 0.008764533
##
##
## -----------------------------------
## Log-likelihood for model wop : -50189.62
## AIC for model wop : -100389.2
## BIC for model wop : -100421.8
## -----------------------------------
## Time taken: 17.789 seconds.Notice the slightly better log-likelihood (at the MLEs) value for the latter model. However, in this case, both the BIC and the AIC (higher is better here) indicate that the former model is the better fitting (more parsimonious) model.