Simple Cleaning Quadrat Data

Introduction

This vignette will walk you through cleaning up quadrat data to produce an easy to analyze data frame.

A little about the data:

The data being cleaned will be the softcoral_LQuads and this vignette will build off of the cropping vignette as well. Data was collected by the Baum Lab and Kiritimati Field Teams. The softcoral_LQuads data are from photo quadrats (1m by 1m) which were randomly annotated with 100 random points each. At each of these annotated points, the substrate was identified. Photo quadrats were collected on Kiritimati Island in the Republic of Kiribati and document coral cover over time and space. The annotations and output of the data frame were produced using CoralNet and all annotations were done manually, by trained researchers.

Cleaning the Data

First lets load the package, the dplyr package, tidyr package and the data, plus a few extras used to create this vignette.

library(quadcleanR)
library(dplyr)
library(tidyr)
library(shiny)
library(knitr)
library(kableExtra)

data("softcoral_LQuads")

Now let me point out some unique aspects of this data:

tail(softcoral_LQuads)
Image.ID Image.name Annotation.status Points AcCor AcDig Acr_arb Acrop AcroTab Astreo B_Acr_arb B_Acro B_Astre BAT B_Cosc B_Echin B_FavHal B_Favia B_FaviaM B_FaviaS B_FaviaSt B_Favites B_FavPent B_Fung BGard B_GonEd B_Herpo B_HYDNO B_HyExe BlAcro.Cor B_Lepta B_Lepto Blisop B_Lobo BlTurbFol B_MOEN B_MOFO B_Monta B_Monti B_Oxyp B_Paly B_PaveDUER B_Pavona B_PEYDO B_Plat B_PMEAN B_Pocillo B_Porit B_Psam B_PVAR B_Sando B_UnkCoral Cirr COSC ECHIN Fav FavHal Favia FaviaM FaviaS FaviaSt FavPent Fung Gardin GonEd Herpo HYDNO HyExe Isopora Lepta Lepto Lobo X.MOEN X.MOFO Monta Monti Oxyp Paly PaveDUER Pavon PEYDO Plat Plero PMEAN Pocill Porit Psam PVAR Sando Tuba TURB UnkCoral ANEM B_Clad B_Sinu Clad EncBry EUR HYDCO Hydra Mille MOBI Sarco SECO Sinu Sponge Stylas UnkTUN XmasW ZOAN B_Sarco Sand Sediment SCRO B_Loph CYAN Loph Rubble SHAD Trans Unc AVRA Caul CCA Dict DICTY Hali Lobph Macro Mdict Pad Peysson Turf TURFH Unidentified
4101 1368736 KI2019_site8_Q6.1.jpg Confirmed 100 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 94
4102 1368737 KI2019_site8_Q6.jpg Confirmed 100 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 100
4103 1368738 KI2019_site8_Q8.6.jpg Confirmed 100 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 98
4104 1368739 KI2019_site8_Q9.7.jpg Confirmed 100 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 98
4105 1368740 KI2019_site8_Q9.9.jpg Confirmed 100 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 99
4106 ALL IMAGES NA 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 100

This data as an Image.ID column which was arbitrarily added to this data set, so we are going to remove that as it holds no scientific value. There is also a final row which sums all quadrats but since we will be removing quadrats and points to clean these data up, we will remove that final row as well. The Image.name column is the unique ID for each photo quadrat, but it is very messy and not easy to use, so we will make this into new columns and add more information. Annotation.status is a column from CoralNet which tells if the annotations in each photo quadrat have been confirmed by human researchers or are only based on AI. The Points column tells us how many randomly annotated points there are in each quadrat, and since they are all 54, we know these data are from the smaller quadrats. The rest of the columns are the different coral and substrate IDs and how many points where annotated for each tag in each photo.

So first, lets remove unneeded columns and make sure we are only working with “Confirmed” annotations.

LQuad_confirmed <- softcoral_LQuads %>% filter(Annotation.status == "Confirmed") %>% select(-c(Image.ID, Points, Annotation.status))

Now we will separate the Image.name column into more descriptive columns.

LQuad_separated <- separate(LQuad_confirmed, Image.name, sep="_", into=c("Field.Season", "Site","Quadrat"))

But if you notice, there are still .jpg and .jpeg in the quadrat names, so lets remove those, and change the naming of siteT19 to site40. At the same time I will remove site8.5, any DEEP sites and any MPQs (mega photo quadrat) from the data set.

LQuad_nojpg <- rm_chr(LQuad_separated, c(".jpg", ".jpeg"))

LQuad_site40 <- change_values(LQuad_nojpg, "Site", "siteT19", "site40")

LQuad_noDEEP_site8.5 <- keep_rm(LQuad_site40, c("DEEP", "site8.5"), select = "row", exact = FALSE, colname = "Site", keep = FALSE)

LQuad_noMPQ <- keep_rm(LQuad_noDEEP_site8.5, c("MPQ"), select = "row", exact = FALSE, colname = "Quadrat", keep = FALSE)

Now lets look at the levels of some of these columns.

unique(LQuad_noMPQ$Field.Season)
##  [1] "KI2013"  "KI2014"  "KI2015a" "KI2015b" "KI2015c" "KI2015d" "KI2016a"
##  [8] "KI2016b" "KI2017"  "KI2018"  "KI2019"
unique(LQuad_noMPQ$Site)
##  [1] "site14" "site15" "site19" "site1"  "site20" "site22" "site23" "site24"
##  [9] "site25" "site26" "site27" "site30" "site32" "site34" "site35" "site3" 
## [17] "site6"  "site8"  "site9"  "site38" "site5"  "site10" "site12" "site33"
## [25] "site37" "site40" "site13" "site18" "site31" "site36" "site7"

Next lets update the column names for this data frame. The column names are currently set as the tag shorthand used during the annotation process, but now I want them to better reflect the actual substrate names.

data("coral_labelset")
head(coral_labelset)
short_name full_name taxonomic_name functional_group life_history
Rubble Broken_coral_rubble Broken_coral_rubble Abiotic_Substrate Not_Coral
SCRO Consolidated_hard_rock Consolidated_hard_rock Abiotic_Substrate Not_Coral
Sand Sand Sand Abiotic_Substrate Not_Coral
Sediment Sediment Sediment Abiotic_Substrate Not_Coral
CCA Crustose_coralline_algae Crustose_coralline_algae Crustose_Algae Not_Coral
Peysson Peyssonnelia Peyssonnelia Crustose_Algae Not_Coral

This is what the label set document looks like, but you could also make this in R by joining a series of vectors. Now lets fix the column names.

LQuad_colnames <- change_names(LQuad_noMPQ, coral_labelset, "short_name", "full_name")
names(LQuad_colnames)[1:16]
##  [1] "Field.Season"                  "Site"                         
##  [3] "Quadrat"                       "Acropora_corymbose"           
##  [5] "Acropora_digitate"             "Acropora_arborescent"         
##  [7] "Acropora"                      "Acropora_tabulate"            
##  [9] "Astreopora"                    "Bleached_Acropora_arborescent"
## [11] "Bleached_Acropora"             "Bleached_Astreopora"          
## [13] "Bleached_Acropora_tabulate"    "Bleached_Coscinarea"          
## [15] "Bleached_Echinophyllia"        "Bleached_Favites_halicora"

Much better.

Now for these photo quadrats, the Shadow, Transect_hardware and Unclear tags need to be removed and not used when we calculate percent cover. If I was going to use this data to do a diversity analysis with hard corals, I would also include unknown_hard_coral, and Bleached_unknown_hard_coral to this list, but we are going to clean this data for soft coral analyses, so we will leave them in.

LQuad_colnames <-  mutate_at(LQuad_colnames, c(4:134), as.numeric)

LQuad_usable <- usable_obs(LQuad_colnames, c("Shadow", "Transect_hardware", "Unclear"), 
                            max = TRUE, cutoff = 10)

LQuad_removed <- usable_obs(LQuad_colnames, c("Shadow", "Transect_hardware", "Unclear"),
                             max = TRUE, cutoff = 10, print_max = TRUE)

By identifying how many usable points there are in each quadrat, and removing any quadrats that had over 10% of the identified points unusable, we have removed 0 quadrats from analysis, which you could view with the LQuad_removed data frame but as we have no quadrats to removed, it will be an empty data frame.

Now we know how many usable annotations for each tag there are in each photo quadrat. Lets convert this into a proportion cover now. This may take a minute as there are many rows.

LQuad_cover <- cover_calc(LQuad_usable, names(LQuad_usable[,4:131]), prop = TRUE) 

This data frame is now nicely formatted and could be used for many community based analyses. This might be a great stopping point for some analyses, but to further clean this up I am going to convert this into long format data.

LQuad_long <- LQuad_cover %>% select(-c(unusable)) %>% pivot_longer(cols = names(LQuad_cover[,4:131]), names_to = "Tag_Name", values_to = "prop_cover")

One thing you may notice by looking at the Tag_Name column, is that these species names are not unique species, but there are duplicates of the same species, categorized into bleaching and non bleaching forms. For any kind of diversity analysis, this would inflate the number of different species, so it is important to combine different forms of the same species if diversity analyses are being done.

For this clean up, we will walk through 3 ways of dealing with this based on what you want to accomplish.

Option A. Categorizing rows.

If you want to use your data in this long format, want to just categorize everything and you will use these various categories based on your different research questions, you could just add a bunch of category columns like so:

A_LQuad_Bleach <- categorize(LQuad_long, "Tag_Name", values = c("Bleach"), name = "Bleached", binary = TRUE, exact = FALSE)

This categorizes each Tag_Name to whether it is a bleaching or nonbleaching tag.

And you could also add other information in if you have it, like taxonomy.

A_LQuad_Taxa <- categorize(A_LQuad_Bleach, "Tag_Name", values = coral_labelset$full_name, name = "Taxonomic_Name", binary = FALSE, categories = coral_labelset$taxonomic_name)

Option B. Categorizing rows and then combining.

Now after you categorize your rows, perhaps you want to have all the cover values summed at a different level, like at the taxonomy level. To do this, the summarise() function from dplyr will work great.

B_LQuad_taxonomy <- A_LQuad_Taxa %>% group_by(Field.Season, Site, Quadrat, Taxonomic_Name) %>% summarise(prop_cover = sum(prop_cover))
## `summarise()` has grouped output by 'Field.Season', 'Site', 'Quadrat'. You can
## override using the `.groups` argument.

Option C. Wide format summing columns

If you wanted to keep the data in a wide format, and sum columns based on taxonomy, to allow for community level analyses, you could also use the sum_cols() function. To do this, we first need a vector of what to change the names too, which can be done with a simple match, unless you have a vector with the new names already in the right order.

current_names <- colnames(LQuad_cover[,4:131])
new_names <- coral_labelset[match(current_names, coral_labelset$full_name),]$taxonomic_name

LQuad_wide_summed <- sum_cols(LQuad_cover, from = current_names, to = new_names)

Whichever of the options you choose, you will be able to customize the data to your analysis needs. After that your data is nearly cleaned. Some other things you may want to add would be environmental data, or more taxonomic data. The add_data() function can help with adding multiple columns from a data set at a time.

B_LQuad_LH_FG <- add_data(B_LQuad_taxonomy, coral_labelset, cols = c("functional_group", "life_history"), data_id = "Taxonomic_Name", add_id = "taxonomic_name", number = 5)

data("environmental_data")

B_LQuad_enviro <- add_data(B_LQuad_LH_FG, environmental_data, cols = c("HD_Cat", "HD_Cont", "NPP",  "WE", "Region", "WaveEnergy"), data_id = "Site", add_id = "Site", number = 4)

The final things I will add to this data to get it in shape for analysis is a final categorization of the study years based on the timing of the 2015/2016 El Niño and subset the species to only soft coral.

B_LQuad_timeblock <- categorize(B_LQuad_enviro, column = "Field.Season", values = unique(B_LQuad_enviro$Field.Season), name = "TimeBlock", binary = FALSE, exact = TRUE, categories = c(rep("Before", times = 4), rep("During", times = 3), rep("After", times = 4)))

simple_cleaned <- keep_rm(B_LQuad_timeblock, values = "Soft_coral", select = "row", colname = "functional_group")

Exploration

This data has now been sufficiently cleaned and can be used for many different analyses. Often once data has been cleaned, the first step is to start exploring the data. One thing we can look at is the sample sizes, to see how many quadrats I have over the different sites and years.

sample_size(simple_cleaned, dim_1 = "Site", dim_2 = "Field.Season", count = "Quadrat")
KI2013 KI2014 KI2015a KI2015b KI2015c KI2015d KI2016a KI2016b KI2017 KI2018 KI2019
site1 28 0 0 0 0 0 0 0 29 0 0
site14 13 21 0 0 30 0 16 0 30 0 0
site15 24 0 29 15 29 0 29 30 30 30 0
site19 21 0 0 0 28 0 0 0 26 0 0
site20 31 0 0 0 0 0 0 0 19 0 0
site22 19 0 0 0 0 0 0 0 0 0 0
site23 25 0 0 0 0 0 0 0 29 0 0
site24 32 0 0 0 0 0 0 0 0 0 0
site25 26 25 0 0 31 0 0 0 17 27 0
site26 30 0 0 0 0 0 0 0 30 0 0
site27 28 30 30 30 29 30 30 30 29 29 30
site3 28 32 0 0 30 0 0 0 29 28 30
site30 29 25 30 30 30 0 30 30 30 21 30
site32 30 0 0 30 30 34 30 30 30 30 30
site34 28 31 0 30 29 0 30 30 29 27 30
site35 26 31 30 30 29 9 26 30 29 30 30
site6 29 0 0 0 0 0 0 30 30 0 30
site8 29 27 30 30 30 27 30 30 30 30 30
site9 26 0 0 0 0 0 30 0 30 0 0
site38 0 31 0 0 30 0 29 0 0 28 30
site5 0 0 0 29 30 0 30 30 27 29 30
site10 0 0 0 0 30 0 0 0 25 0 0
site12 0 0 0 0 0 0 22 30 31 0 30
site33 0 0 0 0 0 0 30 0 31 0 0
site37 0 0 0 0 0 0 30 30 30 30 30
site40 0 0 0 0 0 0 23 30 31 0 30
site13 0 0 0 0 0 0 0 0 23 0 0
site18 0 0 0 0 0 0 0 0 20 0 0
site31 0 0 0 0 0 0 0 0 20 0 30
site36 0 0 0 0 0 0 0 0 27 0 0
site7 0 0 0 0 0 0 0 0 25 0 0

Visualizing the data can be easy with a built in shiny app function. To see an example shiny app you can go here or the following code.

runGitHub("quadcleanR", username = "DominiqueMaucieri", subdir = "inst/shiny/example", ref = "main")

The data used in this example is this data set we have just cleaned. However this does not help you as this is not your own data. You can use the following code to produce a shiny app of your data, which you can then explore your data.

visualize_app(data = simple_cleaned, xaxis = colnames(simple_cleaned[,1:13]), yaxis = "prop_cover")