[en] Introduction to rainette

Julien Barnier

2022-02-18

Corpus preparation

For a description of the Reinert clustering method and its implementation in rainette, please see the algorithms description vignette.

Split corpus into segments

As it doesn’t take into account terms frequencies but only there presence / absence, and as it assigns each document to only one cluster, the Reinert method must be applied to short and “homogeneous” documents. It could be ok if you work on tweets or short answers to a specific question, but with longer documents they must first be split into short textual segments.

You can use the split_segments() function for that, and it can be applied directly on a tm or quanteda corpus. In this article we will apply it to the sample data_corpus_inaugural corpus provided by quanteda.

split_segments will split the original texts into smaller chunks, attempting to respect sentences and punctuation when possible. The function takes two arguments :

The result of the function is a quanteda corpus, which keeps the original corpus metadata and adds an additional segment_source variable, which keeps track of which segment belongs to which document.

## Corpus consisting of 3,584 documents and 5 docvars.
## 1789-Washington_1 :
## "Fellow-Citizens of the Senate and of the House of Representa..."
## 
## 1789-Washington_2 :
## "On the one hand, I was summoned by my Country, whose voice I..."
## 
## 1789-Washington_3 :
## "as the asylum of my declining years - a retreat which was re..."
## 
## 1789-Washington_4 :
## "On the other hand, the magnitude and difficulty of the trust..."
## 
## 1789-Washington_5 :
## "could not but overwhelm with despondence one who (inheriting..."
## 
## 1789-Washington_6 :
## "In this conflict of emotions all I dare aver is that it has ..."
## 
## [ reached max_ndoc ... 3,578 more documents ]
##   Year  President FirstName Party  segment_source
## 1 1789 Washington    George  none 1789-Washington
## 2 1789 Washington    George  none 1789-Washington
## 3 1789 Washington    George  none 1789-Washington
## 4 1789 Washington    George  none 1789-Washington
## 5 1789 Washington    George  none 1789-Washington
## 6 1789 Washington    George  none 1789-Washington

dfm computation

The next step is to compute the document-feature matrix. As our corpus object is a quanteda corpus, we can tokenize it and then use the dfm() function.

We also filter out terms that appear in less than 10 segments by using dfm_trim.

Simple clustering

We are now ready to compute a simple Reinert clustering by using the rainette() function. Its main arguments are :

Here we will compute 5 clusters with a min_segment_size of 15 :

res <- rainette(dtm, k = 5, min_segment_size = 15)

To help exploring the clustering results, rainette provides an interactive interface which can be launched with rainette_explor() :

rainette_explor(res, dtm, corpus)
rainette_explor() interface

rainette_explor() interface

The interface allows to change the number of clusters, the displayed statistic, etc., and see the result in real time. By default the most specific terms are displayed with a blue bar or a red one for those with a negative keyness (if Show negative values has been checked).

You can also click on the Get R code button to get the R code to reproduce the current plot and to compute cluster membership.

The Cluster documents tab allows to browse the documents from a given cluster. You can filter them by giving a term or a regular expression in the Filter by term field :

rainette_explor() cluster documents tab

rainette_explor() cluster documents tab

You can use cutree to get each document cluster at level k :

cluster <- cutree(res, k = 5)

This vector can be used, for example, as a new corpus metadata variable :

corpus$cluster <- cutree(res, k = 5)
head(docvars(corpus))
##   Year  President FirstName Party  segment_source cluster
## 1 1789 Washington    George  none 1789-Washington       4
## 2 1789 Washington    George  none 1789-Washington       4
## 3 1789 Washington    George  none 1789-Washington       3
## 4 1789 Washington    George  none 1789-Washington       3
## 5 1789 Washington    George  none 1789-Washington       5
## 6 1789 Washington    George  none 1789-Washington       5

Here, the clusters have been assigned to the segments, not to the original documents as a whole. The clusters_by_doc_table allows to display, for each original document, the number of segment belonging to each cluster :

clusters_by_doc_table(corpus, clust_var = "cluster")
## # A tibble: 59 × 6
##    doc_id          clust_1 clust_2 clust_3 clust_4 clust_5
##    <chr>             <int>   <int>   <int>   <int>   <int>
##  1 1789-Washington       0       0       4      27       6
##  2 1793-Washington       0       0       0       0       4
##  3 1797-Adams            8       0       5      44       2
##  4 1801-Jefferson       18       0       3      21       2
##  5 1805-Jefferson        2       3       6      43       3
##  6 1809-Madison          0       0       4      17       7
##  7 1813-Madison          0       5       5      20       3
##  8 1817-Monroe           2       0      27      47      12
##  9 1821-Monroe           2       0      37      66      10
## 10 1825-Adams            8       2      13      46       8
## # … with 49 more rows

By adding prop = TRUE, the same table is displayed with row percentages :

clusters_by_doc_table(corpus, clust_var = "cluster", prop = TRUE)
## # A tibble: 59 × 6
##    doc_id          clust_1 clust_2 clust_3 clust_4 clust_5
##    <chr>             <dbl>   <dbl>   <dbl>   <dbl>   <dbl>
##  1 1789-Washington    0       0      10.8     73.0   16.2 
##  2 1793-Washington    0       0       0        0    100   
##  3 1797-Adams        13.6     0       8.47    74.6    3.39
##  4 1801-Jefferson    40.9     0       6.82    47.7    4.55
##  5 1805-Jefferson     3.51    5.26   10.5     75.4    5.26
##  6 1809-Madison       0       0      14.3     60.7   25   
##  7 1813-Madison       0      15.2    15.2     60.6    9.09
##  8 1817-Monroe        2.27    0      30.7     53.4   13.6 
##  9 1821-Monroe        1.74    0      32.2     57.4    8.70
## 10 1825-Adams        10.4     2.60   16.9     59.7   10.4 
## # … with 49 more rows

Conversely, the docs_by_cluster_table allows to display, for each cluster, the number and proportion of original document including at least one segment of this cluster :

docs_by_cluster_table(corpus, clust_var = "cluster")
## # A tibble: 5 × 3
##   cluster     n   `%`
##   <chr>   <int> <dbl>
## 1 clust_1    52  88.1
## 2 clust_2    40  67.8
## 3 clust_3    40  67.8
## 4 clust_4    44  74.6
## 5 clust_5    34  57.6

Double clustering

rainette also provides a “double clustering” algorithm, as described in the algorithms description vignette : two simple clusterings are computed with different min_segment_size values, and then crossed together to get more robust clusters.

This can be done with the rainette2() function, which can be applied to two already computed simple clusterings. Here, we compute them with min_segment_size at 10 and 15.

res1 <- rainette(dtm, k = 5, min_segment_size = 10)
res2 <- rainette(dtm, k = 5, min_segment_size = 15)

We then use rainette2() to combine them. The max_k argument is used to specify the maximum number of clusters.

res <- rainette2(res1, res2, max_k = 5)

One important argument of rainette2() is the full argument :

To be noted : with full = TRUE, if runtime is too high you can add the parallel = TRUE argument to paralellise some computations (won’t work on Windows, though, and may use much more RAM).

In both cases, the resulting object is a tibble with, for each level k, the optimal partitions and their characteristics. Another interactive interface is available to explore the results. It is launched with rainette2_explor().

rainette2_explor(res, dtm, corpus)
rainette2_explor() interface

rainette2_explor() interface

The interface is very similar to the previous one, except there is no dendrogram anymore, but a single barplot of cluster sizes instead. Be careful of the number of NA (not assigned segments), as it can be quite high.

If some points are not assigned to any cluster, you can use rainette2_complete_groups() to assign them to the nearest one by using a k-nearest-neighbors algorithm (with k=1). However this may not be recommended as you would then loose the “robustness” of the new clusters computed by rainette2().

clusters <- cutree(res, k = 5)
clusters_completed <- rainette2_complete_groups(dtm, clusters)