Electrode Localization

In iEEG/ECoG study, it is very common to localize the electrodes using ‘CT’ scans. The CT images have different orientations to the MR images, hence co-registration is often needed. This package does not provide co-registration functions, as different labs might have different approaches. threeBrain only takes co-registered CT scans and visualize them directly. Therefore if you have already co-registered CT, skip the next part.

The rest part of this article uses N27 sample files mentioned by the previous vignette. If you are using this example, please execute the following R code to set up. Alternatively, you can substitute variables subject_code and subject_path accordingly.

library(threeBrain)
subject_code <- "N27"
subject_path <- "~/Downloads/N27"
brain <- freesurfer_brain2(subject_path, subject_code)

CT Co-registration

(skip if you have generated co-registered CT in ‘Nifti’ formats)

This part provides one working method via dcm2niix and FLIRT packages. Again, other methods will work as long as they output CT aligned to MRI in ‘Nifti’ formats.

To start, please download and install dcm2niix (link), FLIRT packages (link).

Step 1: Merge all DICOM images to Nifti format:

Open your terminal (bash or power shell), change directories to where CT DICOM images are, and run

dcm2niix [folder with DICOM images]

Do the same to T1 MR images too.

Step 2: Copy the two .nii files generated in the previous step to a same folder, rename them to be ct.nii and t1.nii

flirt -in ct.nii -ref t1.nii -out ct_in_t1.nii -omat ct2t1.mat -interp trilinear -cost mutualinfo -dof 6 -searchcost mutualinfo -searchrx -180 180 -searchry -180 180 -searchrz -180 180 

There will be a ct_in_t1.nii file generated.

Localize with CT

Assuming you have generated co-registered CT scans in file ct_in_t1.nii, please copy it to the subject folder. The file should be located at

Next, type in and change the file path to ct_in_t1.nii just created

ct_path <- file.path(subject_path, "mri/ct_in_t1.nii")
threeBrain::localization_module(subject_code = subject_code,
                                fs_path = subject_path,
                                ct_path = ct_path)

You will see the threshold CT displayed along with the pial surfaces.

Make sure Edit Mode (in the Electrode Localization panel) is CT/Volume. Now move your mouse cursor to the green electrodes, the localization control panel will display the tkrRAS (FreeSurfer coordinate), T1 (native RAS coordinate), and MNI305 (‘MNI’ template coordinate). Double-click on the green areas, and a new electrode will be created.

The default threshold of CT scans is set to 3000. However, this threshold might need to be adjusted in order to achieve high accuracy. The following figures demonstrate the results of different threshold.

If the threshold is too low, then other irrelevant structures will appear. If the threshold is too high, some electrodes might disappear.

To adjust the CT threshold, open the Volume Settings from the control panel, slide Voxel Min.

Localize with MRI (without CT)

When electrodes are too small, or the CT is unavailable, electrode localization can be done on the MR images. Localization via MRI can be done by the following steps:

  1. switch Edit Mode (in the Electrode Localization panel) to MRI slices
  2. open Volume Settings panel, enable Overlay Coronal, Overlay Axial, or Overlay Sagittal.
  3. adjust Coronal, Axial, Sagittal plane to desired position
  4. double-click on the MRI slices

Automatically interpolate electrodes

In most of the scenarios, electrodes form grids or strips, The threeBrain provides interpolation functions.

For example, we want to localize the electrodes circled in orange color (top-left). You could of course mark them one by one. More efficiently, you can simply localize the electrodes at both ends, set the Interpolate Size to 6 (there are 6 more electrodes to be added), make sure there is no other objects blocking the sight, and hit the Interpolate from Recently Added button (circled in the figure). All other electrodes will be automatically generated.

The newly added electrodes might be inaccurate. Don’t worry, you can adjust them later!

Refine electrodes

Once all the electrodes are marked, change Edit Mode to refine. In the refine mode, you can

To automatically adjust all electrodes, simply click Auto-Adjust All. The new electrode locations will be calculated via a weighted average.

To automatically adjust a specific electrode, double-click one electrode. The highlighted electrode will be colored in red. Then click on Auto-Adjust Highlighted.

To manually adjust a electrode, double-click one electrode. The highlighted electrode will be colored in red. Then hover the mouse above the canvas, press and hold keyboard 1 or shift+1 to move the electrode along Right/Left axis. Press and hold 2 or shift+2 to move the electrode along Anterior/Posterior axis. Press and hold 3 or shift+3 to move the electrode along Superior/Inferior axis.

Download Electrode Table

Once Finished electrode localization, you can take screenshots by opening Default panel, and click on Screenshot.

To download electrode table, click on Download as csv in the Electrode Localization panel. The electrode table should look as follows:

You will notice that the Electrode column is left blank. This is because localization order might be different than the recording channel number. Please fill out Electrode column as the actual channel number (integers).