Cox Regression for Right Truncated Data

What are right truncated data?

When we are interested in the analysis of lifetimes that start at an initiating event and end up when an event of interest occurs, but we cannot obtain a population of interest to follow them prospectively, retrospective ascertainment of cases could be a good alternative. However this might result in right truncated survival data.

Right truncation often happens when we cannot identify the population of interest since their initiating events are latent (like the times of infections), and the population becomes “visible” only when another event, that can be more easily identified, happens. Here we assume that for those who are sampled, the times of initiating events are known or can be reliably estimated.

One example of such type of data is the data set on AIDS cases resulted from contaminated blood transfusion (Kalbfeisch and Lawless 1989). Here, the time of interest is the incubation period of AIDS, i.e. the time from HIV infection to development of AIDS. Figure 1 shows schematically how these data were collected. The individuals who developed AIDS by June 30, 1986 (the date when the AIDS cases were retrospectively ascertained) were selected, satisfying by this the condition \(T_i< R_i\), where \(T_i\) is an incubation period for the \(i^{th}\) person and \(R_i\) is his/her truncation time, defined as the time from HIV infection to June 30, 1986.

In the two functions of the package, coxph.RT and coxph.RT.a0, we assume that \(T_i\) are observed exactly and there is no censoring. The analysis is based only on sampled events. Those who belong to the population but have not developed AIDS by the time of collection of data remain unobserved.

Figure 1. Illustration of retrospective ascertainment of AIDS cases

The sampling condition \(T_i< R_i\) means that we tend to sample shorter lifetimes than longer ones. And an important complication of such sampling scheme is that the follow-up is limited: on Figure 1, \(r_*\), defined as the time from the earliest HIV infection (January 1978) to June 30 1986, is the maximum follow-up time in this data set. This is an important statistic, since it allows us to realize whether our sampling covers the whole range of possible incubation periods or not. If the follow-up is too short, most likely we do not capture longer incubation periods, and they will not only be underrepresented in our sample, but even worse, they are likely to be non-represented at all. We shall call the condition \(P(T>r_*)=0\) a positivity assumption.

For example, in the AIDS data positivity does not hold, since the incubation period of AIDS can be longer that the maximum observed follow-up time in this data set that equals 8.5 years. Under such short retrospective follow-up there was no chance to observe longer incubation times, which means that \(P(T>r_*)>0\), or equivalently, the support of observed \(T^*\) is shorter than the support of the original \(T\) in the population.

Right truncation causes distortion of the original distribution

Even if positivity holds, truncation results in distorted distribution, and it is important to account for this bias. For example, on Figure 2 we illustrate the problem of distortion of the original distribution using simulated data. Here, the population lifetime \(T\) follows Weibull distribution as rweibull(20000, shape=3, scale=1). And the population truncation time \(R\) was generated (independently of \(T\)) from rweibull(20000, shape=2.5, scale=1). The sampled lifetimes \(T^*\) comprise all observations from the population that satisfy \(T_i<R_i\). This resulted in truncation probability \(P(T>R)=0.5\). Figure 2 shows densities of \(T\), \(R\) and \(T^*\). It is clear that distributions of \(T\) and \(T^*\) are different. It is important that in this example positivity holds since the supports of \(T\) and \(R\) are the same, so that every possible lifetime has a chance to be sampled, and this kind of bias can be easily corrected.

Figure 2. Right truncation causes distortion of the original distribution of T

Why it is important to adjust for right truncation in regression

Even if we do not aim to estimate the whole distribution and are interested only in estimation of the effects of some covariates on the incubation period, we still need to adjust for right truncation, since, as we illustrate below, the right truncation blurs the difference between subgroups.

Suppose we have one binary covariate \(Z\). Figure 3 shows distributions in the two subpopulations defined by \(Z\). The lifetime \(T\) is generated from the proportional hazard regression model \(h(t;z)=h_0(t)\exp(\beta z)\) with \(\beta=2\):

library(ggplot2)
library(survival)
set.seed(17)
N <- 20000
Z <- as.numeric(runif(N,0,1) < 0.5)             # binary explanatory variable     
X <-rweibull(N, shape=3, scale=1*exp(-(2*Z)/3)) # shape a=3, scale b=1, beta=2
m <- max(X)
d.tr <- data.frame(time=c(X), variable=c(Z))
d.tr$variable=as.factor(d.tr$variable)
levels(d.tr$variable) <- c( "T | Z=0", "T | Z=1", " ")
p <- ggplot(d.tr) +
  geom_density(aes(x=time, color=variable, fill=variable), alpha=0.5) + 
  scale_color_brewer(palette = "Set1")+
  scale_fill_brewer(palette = "Set1")+
  theme_classic() +
  labs(x = "time")+
  ggtitle("In the population")+
  theme(axis.text.x = element_text(face="bold"),
        axis.text.y = element_text(face="bold"),
        plot.title = element_text(hjust = 0.5) )+ xlim(0, m)
p

Figure 3. Two sub-populations defined by a covariate Z.

Figure 4 shows sample distributions under right truncation with positivity. For this illustration we use the same population as in Figure 3, but truncate it using uniformly distributed \(R\):

  set.seed(0)
  r <- runif(N, 0, m)
  ind <- X<r
  cat("P(T<R) = selection probability = ", mean(ind), "\n")

## P(T<R) = selection probability =  0.6922

  d.tr <- data.frame(time=c(X[ind],r), variable=c(Z[ind], rep(3, N)))
  d.tr$variable=as.factor(d.tr$variable)
  levels(d.tr$variable) <- c( "T* | Z*=0", "T* | Z*=1", "R")

Figure 4. Sample distributions under right truncation and positivity.

Despite the 30% chance of truncation, both Figures 3 and 4 look relatively similar to each other.

On Figure 5, we shorten the follow-up time by using \(r_*=1.1\). This leads to violation of positivity, since longer lifetimes have no chance to be sampled, and the sub-groups become more similar to each other. In such case, without any adjustment, the estimators of \(\beta\) will be biased and it is likely we will not able to discover the difference between subgroups.

Figure 5. Sample distributions under mild violation of positivity.

On Figure 6, severe violation of positivity with \(R\sim U(0,0.4)\) causes the groups to be almost identical:

Figure 6. Sample distributions under severe violation of positivity.

And the situation becomes more complicated when there are several dependent covariates, as described in Vakulenko-Lagun, Mandel, and Betensky (2018).

What does coxrt suggest for right truncated data?

The coxrt package allows to estimate regression coefficients \(\beta\) in the proportional hazards model \(h(t;z)=h_0(t)\exp(\beta z)\).

library(gss)
library(coxrt)
data(aids)
s <- data.frame(age=aids$age, ageg=as.numeric(aids$age<=4), T=aids$incu, R=aids$infe)
s$T[s$T==0] <- 0.5 # as in Kalbfeisch and Lawless (1989)
# analysis assuming positivity
# we request bootstrap estimate of Asymptotic Standard Error (ASE) as well:
sol <- try(coxph.RT(T~ageg, right=R, data=s, bs=TRUE, nbs.rep=500) )
knitr::kable(sol$summary) # print the summary of fit based on the analytic ASE

knitr::kable(sol$bs$summary) # print the summary of fit based on the bootstrap sample distribution

Without positivity use coxph.RT.a0

For the situations without positivity (as in Figures 5 and 6), if \(a_0\) can be hypothesized, based on the subject matter knowledge, or if \(a_0\) is unknown but its interval can be guessed, this information can be used in coxph.RT.a0. This function implements estimating equations denoted as IPW-SA in the original paper. IPW-SA uses stabilized weights. Technically, coxph.RT.a0 solves non-linear equations using BBsolve function from BB package using default parameter settings. For example, in order to estimate \(\beta\), the effect of age at HIV on the incubation period, given that \(a_0=0.2\), we run:

# analysis using adjusted estimating equations for a0=0.2
sol.02 <- try(coxph.RT.a0(T~ageg, right=R, data=s, a0=0.2, bs=TRUE, nbs.rep = 500))
knitr::kable(round(sol.02$bs$summary,2)) 

	coef	exp.coef	SE	CI.L	CI.U	CI.L.H1.b.gr0	CI.U.H1.b.le0	pvalue	pvalue.H1.b.gr0	pvalue.H1.b.le0
ageg	2.89	18.06	0.38	2.26	3.71	2.34	3.56	0	0	1

We can do a sensitivity analysis for \(\hat{\beta}\) for different values of a sensitivity parameter \(a_0\):

# for a0=0:
sol <- try(coxph.RT(T~ageg, right=R, data=s, bs=FALSE) )
# senstivity analysis for different values of a0
a_ <- seq(0.05, 0.55, by=0.05)
est <- CI.L <- CI.U <- NULL
start_time <- Sys.time()
for(q in 1:length(a_))
{
 sol.a <- try(coxph.RT.a0(T~ageg, right=R, data=s, a0=a_[q], bs=TRUE))
 if (sol.a$convergence!=0)
 {
   cat("a0=", a_[q], ". Error occurred in BBsolve.\n")
 } else
 {
   est <- c(est, sol.a$coef)
   CI.L <- c(CI.L, sol.a$bs$summary$CI.L)
   CI.U <- c(CI.U, sol.a$bs$summary$CI.U)
 }
}
end_time <- Sys.time()
end_time - start_time # It takes some time to solve nonlinear estimating equations and to run bootstrap for each value of a0 ...

## Time difference of 2.2345 mins

require(ggplot2)
res.d <- data.frame(a0=c(0, a_), beta=c(sol$coef, est),
                   L.95=c(sol$summary$CI.L, CI.L), U.95=c(sol$summary$CI.U, CI.U))
knitr::kable(round(res.d, 2)) 

a0	beta	L.95	U.95
0.00	2.69	2.01	3.37
0.05	2.71	2.10	3.54
0.10	2.77	2.03	3.66
0.15	2.83	2.20	3.56
0.20	2.89	2.15	3.80
0.25	2.96	2.33	3.76
0.30	3.03	2.33	3.83
0.35	3.11	2.44	4.04
0.40	3.19	2.53	3.83
0.45	3.28	2.72	4.12
0.50	3.38	2.80	4.23
0.55	3.49	2.88	4.34

p <- ggplot(res.d, aes(x=a0, y=beta)) +
 geom_ribbon(aes(ymin=L.95, ymax=U.95), alpha=0.2) +
 geom_line() + geom_point() +
 geom_hline(yintercept=0)
p + xlab(expression( paste(a[0], "=P(T>", r['*']," | z=0)" , sep="")) )+
 ylab(expression( paste(hat(beta), "(", a[0], ")" , sep="")) ) +
 scale_x_continuous(breaks=res.d$a0, labels=res.d$a0) +
 theme(axis.text.x = element_text(face="bold", angle=45),
         axis.text.y = element_text(face="bold"))

Figure 7. Sensitivity analysis for AIDS data

In coxph.RT.a0, only the bootstrap estimator of a SE is available.

Some remarks

• Positivity cannot be tested. This assumption is based on the subject matter knowledge.

• The approach assumes independence between \(T\) and \(R\) in the original population, which cannot be tested. However, if there is dependence between \(T\) and \(R\), it can be discovered by Kendall’s tau test which can be done using packages tranSurv or SurvTrunc.

• If a non-terminal event of interest cannot be observed because death preceded it, that is the event of interest is truncated by death, the approach implemented here can be used only if two lifetimes, time to an intermediate event (=\(T\)) and time to death (=\(R\)), are independent, otherwise the results might be biased.

Some limitations of the coxrt package

• Although in practice, it is possible to have additional left or interval censoring in right truncated data, the package assumes that the exact lifetimes, without any censoring, are observed.

• The current implementation allows for only time-independent covariates.

• The package estimates only covariate effects \(\beta\), and does not provide estimates for the baseline hazard \(h_0(t)\) in the Cox model.